A Bramah lock is the small round lock with a hollow, slotted key that Joseph Bramah patented in London in 1784. The firm he founded still makes them. If you’ve found that little tube of a key on a desk, a deed box or a safe door, here’s who made it and roughly when.
1784
Joseph Bramah’s lock patent, No. 1430
479,001,600
changes for a twelve-slider lock, by Bramah’s own sum
200 gns
offered in the Piccadilly window to anyone who could pick it
1963
the dividing line between “old type” and modern Bramah locks
Key takeaways
- Joseph Bramah (1748–1814), a Yorkshire-born cabinet-maker, patented his lock in 1784. A hollow key pushes a ring of sliders to different depths so the barrel can turn.
- Henry Maudslay built the machines that made the parts, from 1789 until he left in 1797 or 1798. Several of them are now in the Science Museum Group collection.
- The challenge padlock in the Piccadilly window stood until A. C. Hobbs picked it in 1851. The firm paid the 200 guineas under protest.
- The business passed through J. T. Needs & Co. and Whitfields of Birmingham and is still trading in London as Bramah Security Equipment Ltd.
- The name and address stamped on the lock date it best. A plate that just says “Patent” or “Bramah London” is often another maker’s lock built on Bramah’s principle.
In This Article

Bramah at a glance
| Country | England (London) |
| Founded | 1784, Denmark Street, St Giles, then 124 Piccadilly |
| Founder | Joseph Bramah (1748–1814) |
| Main addresses | 124 Piccadilly (from 1784; 14 Piccadilly is also listed in 1790); Pimlico works (from about 1806); J. T. Needs & Co. at Down Street, then 128 Piccadilly, then 100 New Bond Street (from 1887); 2 Nottingham Street (1926); 11 Old Bond Street (1936); 31 Oldbury Place; today 7 Goodge Place, Fitzrovia |
| Names | J. Bramah; J. Bramah & Son (1813); J. Bramah & Sons (by 1818); Bramah & Robinson (1837); Bramah & Co.; J. T. Needs & Co.; Bramah & Co. again (1910); Bramah’s Ltd (1934); Bramah Security Equipment Ltd (1966) |
| Owners after the family | J. T. Needs & Co. (by 1874); Whitfields Safe & Door Co., Birmingham (about 1901); J. R. Bramah & Co. Ltd (1966); Jeremy Bramah (1986) |
| Lock patents | 1784, No. 1430; 1798, No. 2232 |
| Active until | Still trading; the company is listed as active, making locks |
Sources for the table: Grace’s Guide, the patent lists in G. H. Chubb’s 1875 book, a collectors’ dating guide and Companies House, all cited below.123
Joseph Bramah, the cabinet-maker who rethought the lock
Joseph Bramah was born at Stainborough in Yorkshire in April 1748, the son of a farmer. He worked on the land until an injury turned him to woodwork, and he went to London as a cabinet-maker. His first patent, in 1778, was for a water closet, filed from Cross Court, Carnaby Market. By 1783 he had a shop in Denmark Street, St Giles.4
The lock patent followed in 1784, No. 1430, and a second lock patent, No. 2232, in 1798.2 (The day of the first is given as 2 April in Chubb’s list and 21 August by Grace’s Guide.) In 1785 he published A Dissertation on the Construction of Locks, whose subtitle set out to demonstrate “all locks which depend upon fixed wards to be erroneous in principle”.45 That’s the old warded lock and its skeleton key, written off in a single title page.

Locks were only part of it. Grace’s Guide lists a beer pump, fire engines, a planing machine, a way of numbering banknotes, writing pens and, most important of all, the hydraulic press of 1795. He died at his house in Pimlico on 9 December 1814 and was buried at Paddington.4 Our overview of safe lock mechanisms puts his lock alongside Barron’s lever lock and Chubb’s detector.
How a Bramah lock works
Inside the lock are two brass barrels, one fixed and one turning inside it. Thin steel sliders sit in grooves along the inner barrel, and a notched steel locking plate stops it from turning. Each slider has a notch at a different point along its length. The key is a short tube with clefts of different depths cut into its end: pushed in over a central pin, it presses every slider to exactly the depth that brings all the notches level with the plate, and only then will the barrel, and the bolt, turn.5
There’s no bit on the key at all. A stud on the turning barrel does that job, which is why Bramah keys are so small, and why so much of the lock could be made on a lathe.5 Tomlinson’s examples have six sliders, but he notes that Bramah locks were made with many more. Bramah himself worked out that twelve sliders gave 479,001,600 possible arrangements.5

“It is not in art to produce a key or other instrument by which a lock constructed on this principle can be opened.”
Joseph Bramah, Dissertation on the Construction of Locks (1785), quoted by Tomlinson
He wasn’t quite right, and the firm found out long before 1851. Tomlinson’s treatise retells the engineer John Ainger’s account of a newspaper advertisement inviting people who had lost their Bramah keys not to break open their doors and drawers, but to send for the advertiser, who would pick the lock for them. The fix came from a Mr Russell in Bramah’s own works: false notches cut into the sliders, so that a picker could no longer tell a true notch from a decoy.5 We couldn’t find the year of the advertisement; one collectors’ dating guide puts the false notches at 1817.6
Henry Maudslay and the machines
A lock like this is only as good as its tolerances, and the Science Museum Group notes that making it called for new tools and accurate methods.7 Bramah’s answer was Henry Maudslay, born at Woolwich in 1771, who joined him in 1789 and designed and built the machines that made the precision parts. He stayed nine years and left in 1798 after a dispute over his wages, to set up Henry Maudslay & Co.; Grace’s Guide’s page on Bramah gives 1797.84
Some of that machinery survives. The Science Museum Group holds a treadle-driven machine for winding the lock’s spiral springs, catalogued as about 1780, a machine for sawing the slots in lock barrels (about 1788) that can index 4 to 12 slots in a one-inch barrel, and a board of six drilling templates (about 1795). All three came from the Bramah company itself.9107 The museum suggests Maudslay may have designed the spring winder, though its catalogue date is earlier than his arrival.9
Did you know?
Much of Bramah’s special lock-making machinery was reportedly kept out of sight in a locked workshop.7 A lock maker guarding his secrets with a lock seems only fair.
The challenge lock in the Piccadilly window

For decades a padlock hung in the window at 124 Piccadilly with a label offering 200 guineas to “the artist who can make an instrument that will pick or open this lock”.5 When it went up is disputed: Grace’s Guide says 1790, while the Science Museum Group dates the padlock it holds to 1801.111
In the summer of 1851 the American A. C. Hobbs took up the offer. He worked on the padlock in an upper room at Bramah’s shop, not at the Great Exhibition, and opened it after 51 hours spread over 16 days. The arbitrators awarded him the money on 2 September, and Bramah paid £210 under protest.5 You’ll see 45 hours in Grace’s Guide and 52 on Bramah’s own website; the arbitrators’ figure was 51.112
We tell the whole contest, with the Chubb lock Hobbs opened first and the firm’s written protest, in the Great Lock Controversy of 1851. Hobbs had come to London to sell Day & Newell’s bank lock, whose 1851 patent drawing is in our collection. For Bramah the outcome was steel sliders, a smaller keyhole and more false notches, and the padlock went back in the window with the challenge renewed, until the firm withdrew it after an application was made.5 The Science Museum Group now catalogues a padlock as “the challenge lock of Lock Controversy of 1851”, and its record names Bramah Security Equipment Ltd in the credit line.11
The firm after Joseph: from Bramah & Sons to Fitzrovia
Joseph’s eldest son Timothy became a partner in 1813, and by 1818 the firm was J. Bramah & Sons, with his brothers Francis and Edward. A new works opened in Pimlico around 1806; the Belgrave Place works were 180 feet long, and later burned down in 1843.14 The family then split the business in two. The engineering side, with Charles Fox as a partner from 1839, became Fox, Henderson & Co. in 1845, and Grace’s Guide credits that line with ironwork for the Crystal Palace.14 So a firm that grew out of Bramah’s engineering side helped build the hall of the Great Exhibition of 1851, where the lock controversy began.
The locks stayed in Piccadilly under the name Bramah & Co., separated from the engineering business in 1841 by one collectors’ account.6 By 1874 they belonged to J. T. Needs & Co., who moved the shop from 128 Piccadilly to 100 New Bond Street in 1887. Around 1901 Needs was bought by Whitfields Safe & Door Co. of Birmingham, and in 1910 the Bramah & Co. name came back, with an engineering works at Oldbury Place.113 In 1914 the firm described itself as “manufacturers of the genuine Bramah Patent Locks” and also offered steel safes, doors and cases.1
It was incorporated in 1934, bought in 1966 by J. R. Bramah & Co. Ltd and renamed Bramah Security Equipment Ltd, and passed to Jeremy Bramah in 1986. Assembly left Oldbury Place for Hornchurch, Essex, in 1987.1 Companies House still lists Bramah Security Equipment Ltd as active, at 7 Goodge Place in Fitzrovia, making locks.3 The firm calls itself “London’s oldest lock manufacturer”, which, from 1784, is hard to argue with.14
Timeline
- 1784 Joseph Bramah patents his lock and opens in Denmark Street, then Piccadilly.
- 1789 Henry Maudslay joins and builds the lock-making machines.
- 1798 Second lock patent; Maudslay leaves.
- 1813 Timothy Bramah becomes a partner: J. Bramah & Son.
- 1814 Joseph Bramah dies in Pimlico.
- 1851 A. C. Hobbs picks the challenge padlock; Bramah pays 200 guineas.
- 1874 The lock business is owned by J. T. Needs & Co.
- 1887 The shop moves to 100 New Bond Street.
- c.1901 Whitfields Safe & Door Co. of Birmingham buys Needs.
- 1966 Renamed Bramah Security Equipment Ltd.
Sources for the timeline: Grace’s Guide and Tomlinson’s treatise.15
Bramah locks on safes, deed boxes and furniture
Look closely at the bottom line of that trade card: “Iron Chests, Portable Desks, Boxes &c.”15 Even in Joseph’s sons’ day the firm was selling the containers as well as the locks. And it’s a lovely piece of engraving, all copperplate swashes and a Greek key border, with “PATENT” set in a blackletter that would look at home on a banknote.
Bramah locks turn up on far more than safes. The firm still makes door and cabinet locks, and its locksmiths list “locked boxes, suitcases, despatch boxes” among the old pieces they open and repair.1416 Novels of the time take the key for granted. In The Pickwick Papers the clerk Lowten draws a Bramah key “from his pocket, with a small plug therein, to keep the dust out” to open his office door, and in Trollope’s The Eustace Diamonds the necklace sits in Lizzie’s desk “with a patent Bramah key”.1718
On safes, a Bramah lock tells you about the lock, not the safe. By 1914 the firm offered steel safes of its own, at a time when it belonged to a Birmingham safe maker.113 But once the patent had run out, other makers built locks on Bramah’s principle, and collectors warn that plates marked only “Bramah Patent”, “Patent” or “Bramah London” are often their work.19 So read the maker’s plate on the door, not the keyhole.
How to identify a Bramah lock or key
You don’t need to take anything apart. The key, the keyhole and the words on the plate will tell you most of what you want to know.
Clue 1
The key
A short hollow tube with slots of different depths cut into the end and a small nib near the tip. No flat bit. Modern keys are stainless steel with a round bow and come with a dust cap.520
Clue 2
The keyhole
A small round hole, often in a raised collar, with a pin in the middle that the tube of the key slides over. A keyhole shaped for a flat key means a lever or warded lock.5

Dating a Bramah lock by its marks
These ranges come from two collectors’ guides, one compiled with help from Jeremy Bramah, checked against the addresses in Grace’s Guide. Where the guides disagree, the table says so.
| Mark on the lock | Likely date | Source |
|---|---|---|
| “I. Bramah Patent” or “J. Bramah Patent” | 1784 to 1798 | Prescott6 |
| “I. Bramah” or “J. Bramah” with a crown, no “Patent” | From 1798 | Prescott; Lucian19 |
| Bramah with “14 Piccadilly” or “124 Piccadilly” | From about 1800 | Prescott; Lucian |
| “Bramah Patent”, “Bramah’s Patent”, “Patent”, “Bramah London”, or blank | Often another maker using the principle after the patent expired | Lucian |
| “J. T. Needs & Co., Down Street, Piccadilly, W” | 1871 to about 1875 | Lucian (Grace’s Guide has Needs as owner by 1874)1 |
| “J. T. Needs & Co., 128 Piccadilly” | About 1875 to 1887 | Lucian; Grace’s Guide |
| “J. T. Needs & Co., 100 New Bond Street, late J. Bramah 124 Piccadilly”, often with a crown | 1887 to about 1901 (1904 in one guide) | Prescott; Lucian; Grace’s Guide |
| “2 Nottingham Street” | 1926 to 1934 | Prescott; Grace’s Guide |
| “11 Old Bond Street” | 1936 to 1939 | Prescott; Grace’s Guide |
| “31 Oldbury Place” | 1939 to 1963 | Prescott |
| “Joseph Bramah” registered trade mark | From 1966 | Prescott |
Bramah calls any lock made before 1963 “old type”, and says its current mechanism dates from that year.1612 A lock that’s part of a master-keyed system and carries a system number can be dated more closely by the company itself, according to Prescott’s guide.6
Myths and mix-ups
Bramah’s lock patent was granted in 1787.
The patent lists give 1784, No. 1430. The 1787 date comes from the firm’s own website.212
Hobbs picked the Bramah lock at the Great Exhibition.
He picked it in a sealed room above Bramah’s shop at 124 Piccadilly. The Exhibition is only where the argument started.5
The challenge lock is still in the Bramah shop.
The Science Museum Group catalogues a padlock as the 1851 challenge lock, object 1972-290.11
I have a Bramah lock with no key: what now?
Don’t force it. Bramah says its London key department is the only place you can get a replacement Bramah key, and its locksmiths handle “old type” locks too.16 What that involves depends on the lock.
Modern
Registered keys
Modern keys are cut to a number on the owner’s registration card, and only for the person whose signature is on it. If you’ve bought a house with Bramah locks, the firm asks you to call its key department.20
Old type
Antique boxes and desks
For pre-1963 locks Bramah says it cuts keys to the lock or to a pattern, on an 1850 machine now motorised, and prefers you send the lock rather than the whole box or desk.16
Safes
On a safe door
A locked safe is a job for a qualified safe engineer, who can talk to Bramah if the lock is theirs. Our guide to replacement keys for old safes explains the options.
The firm’s web pages carry a 2005 copyright line, so it’s worth ringing before you post anything; if you do post a key or a lock, Bramah’s advice is special delivery and insurance.1416 And if it’s the safe or box itself you want to place, send us photos of the plate, the keyhole and any numbers, and we’ll tell you what we can about who made it and when.
Frequently asked questions
What is a Bramah lock?
A lock patented by Joseph Bramah in 1784, opened by a small hollow key that pushes a ring of sliders to set depths so the barrel can turn. There’s no flat bit on the key.
Is Bramah still in business?
Yes. Bramah Security Equipment Ltd is listed as active at Companies House, at 7 Goodge Place, Fitzrovia, London, and still makes Bramah locks.
Can I get a Bramah key cut?
Only through Bramah’s key department in London, by its own account. Modern keys need the registered number and signature; for old locks, they ask for a working key or the lock itself.
How old is my Bramah lock?
Read the stamp. “Patent” with I. or J. Bramah points to 1784–1798, 100 New Bond Street to 1887 or later, Oldbury Place to 1939–1963, and the “Joseph Bramah” trade mark to 1966 or later.
Was the Bramah lock ever picked?
Yes. A. C. Hobbs opened the challenge padlock in 1851 after 51 hours over 16 days and was paid the 200 guineas. Earlier, a picker’s advertisement had pushed the firm to add false notches to the sliders.
Did Bramah make safes?
The firm sold iron chests by 1818 and offered steel safes in 1914, when Whitfields of Birmingham owned it. A Bramah lock on a safe door doesn’t make it a Bramah safe: check the maker’s plate.
Sources:
- Grace’s Guide, “Bramah and Co” (firm names, partners and addresses, citing among others the London Gazette, Whitaker’s Red Book (1914) and Jim Evans’s gazetteer of lock and key makers). ↩︎
- George Hayter Chubb, Protection from Fire and Thieves (1875), appendix: list of English patents for locks (Bramah, 1784, No. 1430; 1798, No. 2232), via Project Gutenberg. ↩︎
- Companies House, Bramah Security Equipment Limited, company 00289584: incorporated 27 June 1934, status active, nature of business “manufacture of locks and hinges” (checked 12 November 2026). ↩︎
- Grace’s Guide, “Joseph Bramah” (life, patents, addresses and the firm’s early history). ↩︎
- Charles Tomlinson (ed.), Rudimentary Treatise on the Construction of Locks, compiled from the papers of A. C. Hobbs (London: John Weale, 1853), chapter VI “The Bramah lock” (quoting Bramah’s Dissertation), the account of Ainger and Russell’s false notches, and chapter IX “The lock controversy”, via Project Gutenberg. ↩︎
- Paul Prescott, “Bramah locks: a guide to dating”, Antique-Locks.com forum, compiled with help from Richard Phillips and Jeremy Bramah. ↩︎
- Science Museum Group, “Six Bramah lock drilling templates, on pine (wood) board”, about 1795, object 1935-130/2. ↩︎
- Grace’s Guide, “Henry Maudslay”. ↩︎
- Science Museum Group, “Machine for winding spiral springs”, about 1780, object 1935-128, credit Bramah Security Equipment Ltd. ↩︎
- Science Museum Group, “Machine for cutting slots in barrels of locks, with key hole saw blade”, about 1788, object 1935-129, credit Bramah Security Equipment Ltd. ↩︎
- Science Museum Group, “Bramah padlock and key”, object 1972-290, “the challenge lock of Lock Controversy of 1851”. ↩︎
- Bramah, “Bramah Locks” and “Our History”, company website (accessed 12 November 2026). ↩︎
- Grace’s Guide, “Whitfields Safe and Door Co”. ↩︎
- Bramah, “About Bramah” and “Contact Us”, company website (accessed 12 November 2026; the footer reads “Copyright 2005”). ↩︎
- British Museum, Prints and Drawings, trade card of J. Bramah & Sons, D,2.2094, via Wikimedia Commons. ↩︎
- Bramah, “Locksmith Services” (replacement Bramah keys and “old type” locks), company website (accessed 12 November 2026). ↩︎
- Charles Dickens, The Pickwick Papers (1836–37), chapter LIII, via Project Gutenberg. ↩︎
- Anthony Trollope, The Eustace Diamonds (1871–73), chapter XLVI, via Project Gutenberg. ↩︎
- Daniel Lucian, “Bramah Locks and Keys” (formerly antiquebox.org), dating guide to Bramah and J. T. Needs marks. ↩︎
- Bramah, “Bramah Locks: Keys”, company website (accessed 12 November 2026). ↩︎
The History of Safes letter
One old safe a month, in your inbox
Once a month I send one safe worth a closer look, the new maker histories and a find from the patent and advert collection. Nothing else, and you can leave with one click.
You'll get a confirmation email first. One email a month, unsubscribe any time. Privacy policy.


