How to Reset a Combination Padlock: Master Lock, Squire and Luggage Locks

To reset a combination padlock you need the code it has now. Open the lock with it, put the lock into its setting mode (a reset tool, a turn of the shackle or a held button, depending on the model), turn the wheels or dial to your new code, and lock it back into place. Here are the makers’ own steps, lock by lock.

Key takeaways

  • Every resettable padlock in this guide is reset with the shackle open and the lock set to its current code. Master Lock says you can’t reset one without knowing the current combination.
  • On Master Lock’s wheel padlocks the setting mode is either a small reset tool pushed into the side of the body or a 90° turn of the open shackle, and the two are easy to tell apart by what came in the packet.
  • The classic school-style dial padlock, Master Lock’s No. 1500D, can’t be reset at all. Its dial cousins that can, such as the 1590D, use a reset tool in the shackle hole.
  • Built-in locker locks are changed by the locker administrator with a control key, not by the person using the locker.
  • Check the wheels after the reset, before you close the lock. On Master Lock’s sheets, wheels that moved mean the new code didn’t take.
Weathered three-wheel combination padlock hanging from a hasp, its number wheels showing 4567, 2345 and 8901
Photo: GrandCelinien, CC BY-SA 3.0, via Wikimedia Commons (cropped)

How to reset a combination padlock: the short answer

Three things decide how it goes: whether your lock is resettable at all, which kind of setting mode it uses, and whether you still know the current code. The last one isn’t optional. Master Lock’s own sheet for its best-known resettable padlocks says “The lock must be set to the current combination, or you cannot reset it.”1 We haven’t handled these locks ourselves; every step on this page comes from the maker’s sheet or support page for that model, and the footnotes say which.

Your lock looks likeCan you reset it?How
3, 4 or 5 number wheels, a small reset tool in the packet (Master Lock 175 to 178)Yes, with the current codeReset tool into the hole on the side, turn 90°, set the wheels, turn the tool back1
4 number wheels, no tool (Master Lock ProSeries, M175, 875)Yes, with the current codeTurn the open shackle 90°, push it down, turn it another 90°, set the wheels23
A round dial numbered all the way round, code on a sticker (Master Lock 1500D)NoThe combination is fixed at the factory4
A dial with letters or numbers and a reset tool (Master Lock 1590D)Yes, with the current codeReset tool into the shackle hole, then dial the new combination5
A luggage or TSA lock with 3 wheelsUsually, with the current codeA reset button or pin, or a turn of the shackle, while you set the wheels67
A dial fixed into a school or gym locker doorNot by the userThe administrator changes it with a control key8

If you only need to get the lock open with the code you’ve got, that’s a different job, and our guide on how to open a combination lock covers it for dial padlocks, number locks and lockers, with a practice dial to try first.

Resettable wheel padlocks: Master Lock, model by model

Master Lock calls these “Set-Your-Own” locks, and it sells several families that look alike from the front but reset in different ways. The quickest test is the packet. If a small flat key came with the lock and there’s a hole in the side of the body, you have the reset tool type. If not, the shackle itself is the switch.

Master Lock 175, 176, 177 and 178 (reset tool)

These are the steps Master Lock gives for all four models.1

  1. Open the lock with the factory code or the code you set before. Leave the shackle open: the lock must be open and set to its current combination.
  2. Insert the reset tool from the packet into the hole on the side of the lock.
  3. Push the tool in and turn it 90°, in either direction. It stays in that position by itself.
  4. Turn the wheels to your new combination.
  5. Turn the tool back and remove it. The lock is now set to the new code.
  6. Write the new combination down and keep it somewhere safe.

Master Lock Europe’s version of the 175, the 175EURD, works the same way and adds one practical warning: push hard. Its sheet says “Failure to exert force while pushing key in will result in a failed attempt.”7 If you’ve lost the little tool but still know the code, Master Lock says it will send a replacement free of charge.9

Master Lock ProSeries, M175 and 875 (turn the shackle)

Master Lock’s heavier four-wheel padlocks have no tool. You put them into setting mode by turning the open shackle a quarter turn, pressing it in, and turning it again. These are the steps from the ProSeries sheet (it ships with the 1177D), which opens at 0-0-0-0 when new.2

  1. Open the lock with the current code and pull the shackle up.
  2. Turn the shackle 90° towards the back of the lock.
  3. Press the shackle down into the lock until it’s seated.
  4. Turn the shackle another 90°, to the side of the lock.
  5. Set the wheels to your new combination at the black indicator line, and write it down.
  6. Pull the shackle up and check the wheels haven’t moved. If they shifted, the code wasn’t set: go back to step 2.

To lock it, turn the shackle 180°, push it into the lock and scramble the wheels. The sheet has a useful check hidden in its small print: “The dials of a lock with a valid combination do not rotate when the shackle is open.”2 The M175 and the 875 and 975 use the same idea with numbered positions on the body: shackle to position 1, push in until it clicks, on to position 2, set the wheels, pull up and check before locking.310 A new 875 opens at 0-0-0-0; the M175’s factory code is printed at the top of the sheet in its packet.

One trap with the number 178. Master Lock’s US sheet resets the 178 with the reset tool, while Master Lock Europe’s M178EURD resets with the shackle positions I and II.17 Same number, two methods, so go by the full model number on your packet or sheet, not by the number on the body alone.

Other Master Lock Set-Your-Own locks

Master Lock’s support pages carry a short answer for a dozen more models. The table gives the setting move for each; the rest (set the wheels, close up, scramble) is the same as above.79

ModelFactory codeHow you get into setting mode
1520, 1523, 1524, 15340-0-0-0Remove the end cap and all four wheels, keeping the red clutch plate marks on the pointer, then refit the wheels with the new code on the pointer and snap the cap back on
604EURD0-0-0-0Pull out the shackle, turn it 90° and press down, and keep pressing while you set the wheels
6530-0-0-0Pull out the shackle, turn it 90° anticlockwise, press down and turn another 90°; turn it back clockwise when the wheels are set
1550 backpack lock0-0-0Set the wheels to the old code, then hold the button at the bottom while you turn them to the new one
1547, 1549, 1555 backpack locks0-0-0Push the shackle in and hold it while you set the new code
4603EURD retractable cable lock0-0-0Retract the cable, hold the trigger button and push the cable head down until it clicks; pull it out again while still holding the trigger

The 1520 family is the odd one out: you physically take the wheels off. If the end cap won’t snap back on, Master Lock’s answer is that a wheel has gone back upside down.7

Dial padlocks: most can’t be reset

If your padlock has a spinning dial numbered all the way round and came with its three numbers on a sticker, it’s probably a fixed-combination lock. Master Lock’s product page for the No. 1500D, the classic school and gym padlock, lists it as “Non-Resettable Combination”.4 There’s no hole, lever or shackle trick to look for. If you want a code of your own, it takes a different lock.

Master Lock 1590D Precision Dial (reset tool)

The 1590D looks like a dial padlock but lets you choose three letters or numbers, and “A letter can be used more than once”, so a three-letter word of your own will do.5 Its preset combination is on the instruction sheet attached to the back of a new lock. These steps combine the US instructions with Master Lock Europe’s leaflet for the 1590EURD, which spells out step 2.511

  1. Decide on your new three-letter or three-number combination.
  2. Dial the current combination, open the lock and keep it open.
  3. Hold the lock facing you. Hold the reset tool so its Master Lock logo faces the side of the lock, and push it firmly into the shackle hole until its collar touches the body.
  4. Turn the tool 90°, either way, until the logo on the tool faces you.
  5. Turn the dial right at least three times to clear the current combination.
  6. Turn right and stop at your first letter or number.
  7. Turn left one full turn, past your first letter, and stop at your second.
  8. Turn right and stop at your third.
  9. Turn the reset tool back 90° and take it out.
  10. Close the lock and record the new combination somewhere safe.

Steps 5 to 8 are the ordinary right, left, right dialling pattern, done with the tool in. So if you can open a dial padlock, you can already set this one.

Master Lock 1500iD Speed Dial (reset lever)

The Speed Dial has no numbers at all: its code is a run of up, down, left and right moves, and a new lock’s preset is printed on its sheet as four arrows.12 With the lock open, slide the reset lever on the back up towards the “R” with a pointed object. Push the shackle in and squeeze it firmly twice to clear the lock, pull the shackle up, enter your new moves, then slide the lever back down. Close the shackle with a firm squeeze and test the new combination by opening the lock. Master Lock says you can repeat this as often as you like.12

Luggage and TSA locks

A luggage lock is a small wheel lock, and most are reset the same way: with the lock open, hold a button or press a pin while you turn the wheels. A TSA lock adds a keyhole that matters only at the airport. Travel Sentry, which runs the scheme, says its accepted locks carry a red diamond logo and “can be opened by authorised security officers using special master keys”, and that security agencies in more than 80 countries use them.13 That key has nothing to do with your code, and you don’t get one: Samsonite says no key is supplied with its TSA locks, because the keyhole is for TSA or customs agents only.6

Samsonite TSA locks (built into the case)

Samsonite sets its TSA locks to 0-0-0 at the factory and notes that the details vary by product, so check the leaflet that came with the case. Its general steps are these.6

  1. With the current code on the dials (0-0-0 if you’ve never changed it), open the case by sliding or pushing the TSA button.
  2. If there’s a small pinpoint button by the dials, push it in with a pen. If there isn’t, push and hold the opening button towards the dials.
  3. Turn the dials to your new code.
  4. Confirm it: on the pinpoint type, push or slide the button as if to open the case; on the other type, let go of the button you were holding.
  5. Take a picture of your code. That’s Samsonite’s own advice, not ours.

Master Lock 4680 TSA padlock

Master Lock’s three-wheel TSA padlock resets with the shackle, like its 653. Open it at 0-0-0 (or your current code) and pull the shackle out, turn it 90° anticlockwise, press it down and turn it another 90°. Set the wheels to your new code, then turn the shackle back 90° clockwise and return it to its closed position.7

Built-in locker locks: the office changes them

The dial fixed into a school, college or gym locker door isn’t yours to reset, even if you’ve been given the combination. Master Lock built its locker locks for the administrator: its sheet for models 1630 to 1671 says combinations “can be changed in a few seconds”, but only one person should have authority to change them, and each new combination should be reported to the office so the records match.8 The change is made with a control key that the same sheet tells administrators to guard along with the combination chart.

So if you want a new code on your locker, ask whoever runs the lockers. It isn’t red tape for its own sake: the same sheet has the administrator write the user’s name on the chart under each combination, and a code changed behind the office’s back would leave that chart wrong.

Squire and other UK padlocks

In the UK you’re as likely to be holding a Squire as a Master Lock. Henry Squire & Sons of Wolverhampton publishes a picture sheet, with almost no words, for its CP40, CP50 and CP60 combination padlocks made from 2018 on; the CP40 and CP50 have four wheels and the CP60 has five.14 This is our reading of its eleven pictures, so check it against the sheet if you have it:

  1. Turn the wheels to the current code on the red line (0000 on a new lock).
  2. Press the release button on the underside and lift the shackle.
  3. With a screwdriver, take out the small screw on the top of the body.
  4. Press and hold the release button, and turn the wheels to the new code.
  5. Let go of the button.
  6. Put the screw back, without forcing it.
  7. Push the shackle down and turn the wheels to hide your code.

The last picture on the sheet is a pen and a row of empty boxes for your new code, which tells you what Squire expects people to forget. It also recommends setting your own code and getting used to the lock before you fit it to whatever you’re securing.14

For other brands we hit a wall. We couldn’t open ABUS’s own instruction PDFs, and for Brinks we only found copies on manual-sharing sites, not on the maker’s own pages, so we haven’t put their steps here under the maker’s name. The leaflet in the packet is the safest guide for those. The pattern on every sheet we did read is the same, though: lock open, current code set, setting mode on, new code, setting mode off.

If the new code doesn’t work

Most failed resets come down to the setting mode not engaging, which the makers’ sheets warn about in their own ways. Work through this before you close the lock on a code you’re not sure of.

  • The wheels moved after the reset. On Master Lock’s shackle-turn models that means the code wasn’t set. Go back to the first step.2
  • The reset tool didn’t seem to do anything. On the 175EURD, a tool that isn’t pushed in firmly gives “a failed attempt”. Push harder, then turn.7
  • The end cap won’t go back on (1520 family). A wheel is upside down. Also check that the red clutch plate marks are still on the pointer.7
  • The lock is stiff or sticks. Master Lock recommends its own lock lubricant for resettable locks that stick from time to time.1
  • You’ve lost the reset tool. Master Lock will send a replacement free of charge if you give it the model number or a photo of the lock.15

The one problem a maker can’t fix is a new code you’ve already forgotten. Master Lock’s answer covers accidental resets too: “You cannot reset this lock without knowing the current combination”, and it keeps no record of codes owners set.15 If you’ve already lost the code, our page on what to do when you forget your padlock combination goes through the options for your own lock.

How to pick a good new code

The code you pick matters more than the lock you bought. The best evidence we found for what people choose is a 2012 study by Nick Berry at DataGenetics, who analysed almost 3.4 million four-digit passwords as a stand-in for PINs. One code, 1234, made up 10.713% of them, and the top 20 codes covered 26.83%. Years were everywhere: every code from 1900 to 1999 sat in the top fifth of the list, which Berry reads as people using birth years and anniversaries.16

So for a four-wheel padlock, skip runs like 1234, repeated digits and anything that looks like a year, especially your birth year. Berry has a warning about the rarest code in his data too: don’t switch to it, because people reading the study may now try it first.16 Then write the new code down before you close the shackle, not after. Master Lock’s sheets end with “record your combination” and point to its online store at masterlockvault.com; Samsonite suggests a photo; Squire leaves you boxes to fill in.3614 Whichever you choose, keep it away from the bag or locker the lock is guarding.

Any combination padlock can be reset.

Only resettable models. Master Lock lists its 1500D dial padlock as non-resettable.

The reset tool will reset a lock whose code I’ve forgotten.

The lock has to be open and set to its current code first. Master Lock says there’s no way round that.

The TSA key resets my luggage lock.

The TSA master key is for security officers to open the lock. Samsonite doesn’t supply one, and your code is set with the button or pin.

The changeable combination, a short history

Changing a combination without taking the lock apart is an old idea. In 1888 Thomas S. Spivey of Cincinnati patented, for the Victor Safe and Lock Company, a permutation lock with a combination changer: you loosened a screw, lifted a small rod out of one hole in a disk and dropped it into another, and the lock had a new combination.17 The reset tool in a modern padlock does the same job with a quarter turn. Our history of lock mechanisms in safes follows the bigger story, from lever locks to time locks.

A safe is a different matter. Changing the combination on a safe lock, such as the dial locks made by Sargent & Greenleaf, is a job for a safe technician, so we don’t cover it here. Key safes sit in between: they’re reset from the inside with a lever or setting dials, and our guide on how to change a key safe code has the makers’ steps.

Frequently asked questions

How do I reset a Master Lock combination?

Open it with the current code and leave the shackle open. On the 175 to 178, push the reset tool into the hole on the side and turn it 90°; on ProSeries, M175 and 875 models, turn the shackle 90°, press it down and turn it again. Set the new code, then turn the tool or shackle back.

Can I change the combination on a Master Lock dial padlock?

Not on the standard No. 1500D, which Master Lock lists as non-resettable. Resettable dial models such as the 1590D come with a reset tool that goes into the shackle hole while you dial the new combination.

Can I reset a combination padlock without the old code?

No. Every method from the makers starts with the lock open at its current code, and Master Lock says a resettable lock can’t be reset without it. If the code is gone, see our page on forgotten padlock combinations.

What is the factory code on a new combination padlock?

On most wheel padlocks in this guide it’s all zeros: 0-0-0-0 on four-wheel models and 0-0-0 on three-wheel ones, including Samsonite’s TSA locks. Some models, such as the M175 and the 1590D, have a factory code printed on their sheet instead.

How do I change my school locker combination?

Ask the school office or whoever manages the lockers. Built-in locker locks are changed by an administrator with a control key, and the new combination goes on the school’s chart.

Sources:
  1. Master Lock, 178D FAQ sheet (copy hosted by a retailer): “How do I set or reset the combination on a Set-Your-Own combination padlock model 175, 176, 177 or 178?”, six steps with the reset tool, “The lock must be set to the current combination, or you cannot reset it”; lock lubricant 2300D and 2311 for locks that stick. Accessed 12 November 2026. ↩︎
  2. Master Lock, “ProSeries Resettable Combination Padlock Instructions” (1177D sheet; copy hosted by a retailer): first opening at 0-0-0-0, shackle turned 90° to the back, depressed, turned 90° to the side; “If dials shifted, the combination was not set; return to step one.” Accessed 12 November 2026. ↩︎
  3. Master Lock, “Operating Instructions for the Master Lock M175 Combination Lock”: shackle to position 1, pushed in until it clicks, on to position 2, dials set at the black indicator line, verify before locking; factory code at the top of the packaged sheet; store the code at masterlockvault.com. Accessed 12 November 2026. ↩︎
  4. Master Lock, No. 1500D combination dial padlock (product page): keying listed as “Non-Resettable Combination”, filed under Preset Combination. Accessed 12 November 2026. ↩︎
  5. Master Lock, “Instructions for the Master Lock 1590D Precision Dial Combination Lock”: preset combination of 3 letters or numbers on the sheet attached to the lock; reset tool inserted in the shackle hole and turned 90°; new combination dialled right, left, right; “A letter can be used more than once.” Accessed 12 November 2026. ↩︎
  6. Samsonite UK, “Locks” (customer help page): TSA locks set to 0-0-0 at the factory; pinpoint button pushed in with a pen, or the opening button held, while the dials are turned; take a picture of your code; no key supplied, the keyhole is for TSA or customs agents; forgotten codes to an authorised dealer. Accessed 12 November 2026. ↩︎
  7. Master Lock Europe, “Set-Your-Own combination locks: instructions and FAQs”: 175EURD reset tool (“Failure to exert force while pushing key in will result in a failed attempt”); 1520EURD, 1523EURD and 1534EURD wheels removed with the red clutchplate marks kept on the pointer; 604EURD and 653EURD shackle methods; TSA 4680EURD at 0-0-0; M175EURDLF and M178EURD shackle positions I and II; 1550 backpack lock button. Accessed 12 November 2026. ↩︎
  8. Master Lock Company, “Suggestions for administering your Master Lock built-in combination locks”, sheet 7000-0074 (Milwaukee, 2003), models 1630 to 1671: combinations changed “in a few seconds”, only one person with authority to change them, new combinations reported to the office, “GUARD THIS CHART AND THE CONTROL KEY!” Accessed 12 November 2026. ↩︎
  9. Master Lock, “Reset & Retrieve Lost Combinations” (support FAQ, US): per-model setting answers (175 to 178, 643D, 653D, 1520D to 1534D, 1550), no reset without the current combination, free replacement reset tool. Accessed 12 November 2026. ↩︎
  10. Master Lock, “Operating Instructions for the Master Lock 875 / 975 Combination Lock” (sheet 7000-0081): factory-new code 0-0-0-0, shackle positions 1 and 2, “Verify that the dials remained set to the desired combination before locking.” Accessed 12 November 2026. ↩︎
  11. Master Lock Europe, 1590EURDCOL leaflet (multilingual PDF): “Dial the current combination to open the lock and maintain it open” before inserting the reset tool; ten steps to change the combination. Accessed 12 November 2026. ↩︎
  12. Master Lock, “1500iD Speed Dial Instructions”: preset combination of 4 up, down, left or right arrows; reset lever on the back slid towards the R with a pointed object; squeeze the shackle twice to clear; test the new combination. Accessed 12 November 2026. ↩︎
  13. Travel Sentry, “TSA lock”: a TSA lock “can be opened by authorised security officers using special master keys”; accepted locks carry the Red Diamond logo; used by security agencies in 80+ countries. Accessed 12 November 2026. ↩︎
  14. Henry Squire & Sons, “CP40, CP50 & CP60 (2018+): how to set your own code” (illustrated instruction sheet, Wolverhampton; linked from squirelocks.co.uk): eleven numbered pictures from 0000 on the red line to “turn the wheels to hide your code”; “press and hold”, “release button”, “do not pull on the lock”; Squire recommends setting your own code before fitting. Accessed 12 November 2026. ↩︎
  15. Master Lock Europe, “Padlocks: service and support FAQs”: “You cannot reset this lock without knowing the current combination”, also after an accidental reset; free replacement reset tool with the model number or a photo; no record of owner-set combinations. Accessed 12 November 2026. ↩︎
  16. Nick Berry, “PIN analysis”, DataGenetics, 17 September 2012: almost 3.4 million four-digit passwords; 1234 is 10.713%; the top 20 codes cover 26.83%; “Every single 19?? combination can be found in the top fifth of the dataset”. Accessed 12 November 2026. ↩︎
  17. US Patent 390,528, Thomas S. Spivey, Cincinnati, assignor to the Victor Safe and Lock Company, “Permutation-lock”, 2 October 1888 (filed 14 January 1888), via Google Patents. ↩︎

The History of Safes letter

One old safe a month, in your inbox

Once a month I send one safe worth a closer look, the new maker histories and a find from the patent and advert collection. Nothing else, and you can leave with one click.

You'll get a confirmation email first. One email a month, unsubscribe any time. Privacy policy.

Hos Logo
Greg

I work in IT and I'm a designer at heart. I write this blog because safes turned out to be a surprisingly big slice of history and pop culture. Every article here is checked against period catalogues, patents and trade directories, and my favourite story is still the Great Lock Controversy of 1851.

Articles: 166

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.