Strictly, a skeleton key is a warded-lock key with most of its bit cut away, so it slips past the wards of many simple locks. Today the name covers almost any old bit or barrel key, and most of the ones in a junk-shop tin opened doors, furniture, trunks or clocks.
1853
the year of the lock treatise we quote on how skeleton keys work
4 in 12
different keys in a dozen of one Corbin brass chest lock, 1884
2,592,000
key changes Chubb claimed for one 3-inch drawer lock, 1875
Key takeaways
- A true skeleton key was cut back so it missed the wards of several warded locks. It never worked on lever, Bramah or pin-tumbler locks, which were invented to defeat false keys.
- A key with a solid shank usually belonged to a door lock worked from both sides. A hollow (barrel or pipe) shank fitted over a pin, so it opened a lock from one side only: a cupboard, chest, box or trunk.
- Furniture lock makers sold keys by the gross and often made only a few different patterns, so one old key may fit several boxes.
- Most loose old keys sell for a few dollars each. Brass railroad keys stamped with a railroad’s initials and finely decorated 17th and 18th century keys are the exceptions.
- Keep keys dry and handle them little. Don’t polish away the wear: on railroad keys it’s one of the signs collectors use to spot fakes.
In This Article

Skeleton keys at a glance
| Strict meaning | A warded-lock key cut away so it clears the wards of many locks1 |
| Loose meaning | Almost any old key with a round shank and a bit at the end |
| Lock it belongs to | The warded lock, used since Roman times1 |
| Main shapes | Bit key (solid shank), barrel or pipe key (hollow shank), flat bow key |
| Typical uses | Room doors, cupboards, cabinets, chests, trunks, clocks, padlocks |
| Old-fashioned by | 1875, according to the lock and safe maker George Hayter Chubb2 |
| Common American marks | Corbin, Yale & Towne, railroad initials with makers such as Adlake |
| Typical value | A few dollars for loose door and furniture keys; more for marked railroad keys and early decorated keys |
What is a skeleton key?
Start with the lock. A warded lock guards its bolt with wards: curved pieces of metal fixed inside the case. The bit of the right key has clefts cut in exactly the places where the wards stand, so it can turn a full circle and push the bolt. A key without those clefts jams against the wards and goes nowhere.1
The trouble, as the 1853 Rudimentary Treatise on the Construction of Locks put it, is that wards only stop keys that hit them. A key with most of its bit cut away hits nothing, and can turn in several locks whose proper keys look nothing alike. The treatise calls that key a “skeleton-key” and uses the same idea to explain the master key, one key that commands many locks.1 It’s a skeleton in the plain sense of the word: the bare frame of a key, with the flesh taken off.
Locksmiths and burglars both knew it. George Hayter Chubb, of the lock and safe firm, listed skeleton keys first among a professional burglar’s tools in 1875.2 American lock makers used the master key openly for their customers: the Corbin Cabinet Lock Company’s 1884 catalogue lists cabinet locks that could be made “with Master Key to pass”.3
So when an antique dealer labels a tray “skeleton keys”, it usually means old bit keys in general, not keys that were ever cut down. That’s how we use the phrase in the rest of this guide. We don’t explain how to make or use a skeleton key to open a lock, and if you’re locked out of an old door, cupboard or box, a locksmith is the right call.
More modern, but considered now to be old-fashioned, are the letter lock and warded lock.
George Hayter Chubb, Protection from Fire and Thieves, 1875
A short history of the warded lock and its key
The warded lock is old. Tomlinson’s treatise took the Roman keys found at Herculaneum and Pompeii, and “those attached to rings”, as proof that the Romans knew “a kind of warded lock”.1 The Metropolitan Museum of Art has a Roman bronze ring key of the 3rd or 4th century CE only 4.5 cm across, the key and the ring in one piece.4 You wore it, which is one way of never losing it.
For centuries locksmiths tried to make warded locks safer by making the wards more complicated. The 1853 treatise is blunt about where that led: the system itself was “fallacious”, because a cut-down key could avoid any ward, however fancy.1 Real security came from moving parts that a key had to lift to exactly the right height.

- Roman era Keys, including bronze ring keys, for warded locks1,4
- 1778 Barron patents the double-acting tumbler lock (31 October)1
- 1784 Joseph Bramah patents his lock (21 August), with a very small key5,1
- 1818 Chubb patents his detector lock with six double-acting tumblers (3 February)1
- 1853 Tomlinson’s treatise explains the skeleton key and the master key in print1
- 1865 Linus Yale Jr. patents his improved pin-tumbler cylinder lock with a flat key6
- 1875 George Hayter Chubb calls the warded lock “old-fashioned”2
- 1884 Corbin still sells warded furniture locks and assorted keys by the gross3
Barron’s lock of 1778 had tumblers that stopped the bolt if they were lifted too little or too much, and Chubb’s of 1818 added a detector that jammed the lock after a false key had been tried.1 Our history of lock mechanisms follows these inventions into safes, and the story of Joseph Bramah and his challenge lock has its own page. Yale’s pin-tumbler cylinder lock of 1865 is the ancestor of the flat-key cylinder lock on most front doors today.6 None of these could be opened with a skeleton key, which is exactly why they were invented.
The warded lock didn’t vanish, though. It was cheap, and it stayed on inside doors, furniture and trunks long after banks had moved on. Chubb wrote it off as old-fashioned in 1875, yet nine years later Corbin’s catalogue still listed cast brass cupboard locks with “1 Ward” and “Fancy Bit Keys”.2,3 That’s why there are so many of these keys about.
Types of old keys and what they opened
The shank tells you more than the bow. Tomlinson pointed out that a key with a pipe or barrel, a hollow shank that fits over a pin in the lock, can only open a lock from one side, as on a box or cupboard. A key with a solid stem can work a lock from either side, “as in a street-door lock”.1 Our guide to antique door locks covers the rim and mortice locks these keys opened.
| Type | How to recognise it | What it usually opened |
|---|---|---|
| Bit key, solid shank | Round solid shank, flat bit at the tip, often a collar part way along | Mortise and rim locks on doors, worked from both sides1 |
| Barrel or pipe key | Hollow tip that slides over a pin inside the lock | Cupboards, cabinets, chests, boxes and trunks, locked from one side1 |
| Flat bow key | Small key stamped from flat metal, bow and bit in one plane | Chest, till and drawer locks; Corbin fitted “Fine Flat Bow Keys” to many in 18843 |
| Lever lock key | Bit cut in steps of different heights | Lever locks such as Chubb’s, on safes, doors and boxes1 |
| Clock key | A socket instead of a bit; “crank style” for tall clocks | Winding clocks; auction lots mix them with lock keys7 |
| Railroad switch key | Usually brass, railroad initials stamped on the bow | Switch locks, signals and railroad buildings8 |
| Safe deposit key | Flat blade with square notches, maker and number on the bow | Bank safe deposit boxes, not doors |
Corbin’s 1884 list of key blanks gives a feel for how many kinds a hardware firm stocked: double bit, fancy bit, fancy bow, flat bow, flat steel, plain bow, solid nickel bit, trunk, and blanks for piano and sewing machine locks.3 If you have a tiny key that fits nothing in the house, a piano lid or an old sewing machine case is worth a try before the jewellery box.
Two kinds that turn up in the same drawer belong to other locks entirely. A key with a stepped bit is a lever key, and in Britain it’s often a Chubb: see what a Chubb key is. A flat key with square notches and a number on the bow is usually from a bank box, covered in our guide to safe deposit box keys. Large heavy keys with a bit at the end may come from a strongbox or deed box; our page on antique strongboxes shows what those locks look like.
Did you know?
Furniture locks often came with very few different keys. Corbin sold one brass chest lock with “4 changes in a dozen”, meaning a dozen locks shared four key patterns, and charged extra for any lock made with more than 12 changes.3 An old trunk key that opens a stranger’s trunk isn’t a skeleton key. It’s just a common one.
How to tell how old a key is
We looked hard for a reference that dates keys by shape alone and couldn’t find one we’d trust. Even metallurgists studying old keys note that there’s no certain timeline for when locks and keys began to be mass-produced in the American Midwest.9 So treat what follows as clues that add up, not as a test.
- A maker’s name or mark. The best clue you can get. P. & F. Corbin of New Britain, Connecticut, took that name in 1851, and Philip Corbin was also president of the Corbin Cabinet Lock Company.10 Yale & Towne of Stamford, Connecticut, was taking out lock patents under that name by 1906.11 A firm’s name can’t be older than the firm.
- Material and finish. By 1884 American catalogues offered nickel-plated bit keys, brass keys and flat steel keys alongside plain iron ones.3 A plated or stamped steel key is a factory product; a lumpy, uneven wrought-iron key may be earlier or simply hand-made.
- Decoration. The finest early keys have pierced and chiselled bows. Three 17th and 18th century keys sold at Bonhams in 2021 had bows cut with monograms and coronets, one with “GR” for George III.12
- Stamped initials. Railroad initials on a brass key point to a switch or signal lock, which collectors can often date by the railroad and the maker.8
- Wear. Genuine old keys show even wear from use. Lettering that’s crisp while the rest of the key is worn is a warning sign.13

If the key came with its lock, look at the lock first. A name on the case, a patent date or a serial number tells you far more than the key ever will. With a safe or strongbox key, the lock’s number can sometimes be looked up; our guide to replacement keys for old safes explains which makers kept registers.
Railroad keys: the ones collectors look for
American railroads issued keys to their staff for the locks on switches, signals, buildings and other property. Most were made to a standard size to fit a switch lock, with the bit cut to that railroad’s pattern, and they were typically brass and stamped with the railroad’s name or initials.8 Makers included Adams & Westlake of Chicago (Adlake), C. T. Fraim and Slaymaker of Lancaster, Pennsylvania, and several others; a diamond around the maker’s mark was the symbol of Fraim-Slaymaker and its predecessor.8
Because collectors pay for rare railroads, this is also where the fakes are. Railroadiana Online lists the warning signs: no patina or pocket wear, lettering that’s sharp on an otherwise worn key, initials ground off and restamped, letters cast in rather than stamped, rough joins between barrel and bow, and one fake made of lead that gave “a dull sound” when dropped.13 A bright, unworn brass key with the initials of a famous railroad deserves a second look before you pay for it.
A skeleton key opens any lock.
Only simple warded locks. Barron’s, Bramah’s, Chubb’s and Yale’s locks were designed so that it couldn’t.
Every old bit key is a skeleton key.
Strictly, a skeleton key is one cut down to pass many locks. Most old keys are ordinary keys for one lock, or for a handful.
A shiny brass key with railroad initials is a good find.
Maybe. Collectors warn that fakes often lack wear and patina, and that rare initials are sometimes stamped over common ones.
What are antique skeleton keys worth?
Less than the listings suggest, for most of them. The sale records below show the spread: ordinary door and furniture keys sell by the bag, marked railroad keys by the piece, and early decorated keys as works of art.
| What sold | Where and when | Price |
|---|---|---|
| More than 100 keys for 19th and early 20th century locks, plus clock keys and over 100 watch keys, one lot | Schmitt Horan & Co., auction 10197 | $350 |
| Two brass switch keys stamped L&A RY, one marked Adlake | Soulis Auctions, March 202114 | $70 |
| One brass key stamped S.&NY.RR., signed Adlake | Soulis Auctions, March 2021 | $120 |
| Group of 28 mostly continental keys, 17th to 19th century | Bonhams, Edinburgh, September 202112 | £8,288 |
| Three fine English and French keys with chiselled bows, 17th and 18th century | Bonhams, Edinburgh, September 2021 | £7,650 |
Soulis prices are hammer prices before the buyer’s premium; Bonhams prices include it. The Bonhams keys came from one collection, the Andrew Crawforth collection of early metalware.12 What pushes a key up: a maker’s or railroad mark, early date, fine decoration, a known history, and the lock it belongs to. What keeps it down: no marks, rust, and the sheer number of plain bit keys that survive.
These are past sale results, not valuations. Prices vary with condition, rarity and the sale, so treat any figure here as an informal guide and not a professional appraisal.
How to look after old keys
Most old keys are iron or steel, and iron rusts when the air is damp. The Canadian Conservation Institute says rust typically needs relative humidity above about 65 percent indoors, and less if the surface is dusty or salty. It advises keeping iron objects in a dry place, away from attics, basements and garages, and protecting them from too much handling, since salts and oils from skin cause corrosion.15
For light rust on a key that was originally bright, the institute suggests the finest grade of steel wool (0000) with a light oil, rubbed along the existing tool marks, and a thin coat of microcrystalline or white paste wax wiped well off. Heavy red or orange rust with flaking pieces is a job for a metals conservator.15 On brass railroad keys, don’t polish: the wear and patina are part of what tells a collector it’s genuine.13 A ring of keys hung on a nail in the garden shed is, sadly, the textbook way not to do it.
Frequently asked questions
What is a skeleton key?
In the original sense, a key for warded locks with most of its bit cut away, so it misses the wards of many different locks. Today the name is used for almost any old key with a round shank and a bit at the end.
How do skeleton keys work?
A warded lock relies on fixed obstructions to stop the wrong key turning. A key with most of its bit removed doesn’t touch them, so it can turn in several such locks. It has no effect on lever, Bramah or pin-tumbler locks.
What did old skeleton keys open?
Mostly interior doors with mortise or rim locks, cupboards, cabinets, chests and trunks. A hollow-tipped barrel key usually belonged to furniture or a box; a solid shank usually to a door.
Are antique skeleton keys worth anything?
Plain door and furniture keys sell for a few dollars each, often in bulk lots. Railroad keys with stamped initials have sold for $35 to $120 each at auction, and fine decorated 17th and 18th century keys for thousands of pounds.
What is a barrel key?
A key with a hollow shank that slides over a pin inside the lock. Because of that pin it can only work a lock from one side, which is why barrel keys belong to cabinets, chests, boxes and trunks.
Ask us
Found a key you can’t place? Send us a photo of both sides of the bow and the bit, and of any lock or box it came with, and we’ll tell you what we can about the type, the maker and the likely age. We never make keys or open locks.
Sources:
- Charles Tomlinson (ed.), Rudimentary Treatise on the Construction of Locks, from the papers of A. C. Hobbs (London, 1853), ch. II (ancient locks: Roman keys from Herculaneum and Pompeii), ch. IV (warded locks: wards, “skeleton-key” and master key, pipe keys and solid-stem keys), tumbler locks (Barron, patented 31 October 1778; Chubb, patented 3 February 1818), via Project Gutenberg. ↩︎
- George Hayter Chubb, Protection from Fire and Thieves (London, 1875), ch. I: the warded lock “considered now to be old-fashioned”, a 3 in. Chubb drawer lock with 2,592,000 changes, skeleton keys among a burglar’s tools, via Project Gutenberg. ↩︎
- Corbin Cabinet Lock Company, Illustrated Catalogue and Price List of Cabinet and Trunk Hardware (New Britain, Conn., 1884): “Price list of keys and blanks” (assorted cabinet, cupboard, chest, trunk, till and bag keys priced per gross; key blanks including double bit, flat bow, flat steel, solid nickel bit, trunk, piano and sewing machine), chest locks with “4 changes in a dozen”, extra charge for more than 12 changes, locks “with Master Key to pass”, Library of Congress copy via Internet Archive. ↩︎
- The Metropolitan Museum of Art, “Bronze ring key”, Roman, 3rd–4th century CE, 4.5 cm, accession 98.11.2 (Open Access, public domain). ↩︎
- Grace’s Guide, “Joseph Bramah” (patent 1430 for the lock, 21 August 1784). ↩︎
- Linus Yale Jr., US Patent 48,475, “Improvement in locks”, 27 June 1865, via Google Patents. ↩︎
- Schmitt Horan & Co., auction 1019, lot 357, “A large lot of clock, watch and skeleton keys for older locks”, including crank keys for tall clocks, over 100 watch keys and more than 100 keys for 19th and early 20th century locks, estimate $300–400, sold $350 (checked 12 November 2026; sale date not shown). ↩︎
- Railroadiana Online, “Railroad keys” (switch keys, railroad initials, makers including Adams & Westlake, Fraim, Slaymaker; the Fraim-Slaymaker diamond), checked 12 November 2026. ↩︎
- G. M. Lucas, R. R. Antoine, M. M. Mikolajczak and M. K. Quinn, “Early 19th century French and American key comparison”, abstract, ASM International IMAT 2026 conference, Québec City, 29 September 2026. ↩︎
- Amy Gagnon, “Philip Corbin: Manufacturing a legacy for New Britain”, ConnecticutHistory.org (Connecticut Humanities), 24 August 2013. ↩︎
- Warren H. Taylor (assignor to the Yale & Towne Manufacturing Company, Stamford, Connecticut), US patent 814,335, “Changeable combination key lock”, granted 6 March 1906, via Google Patents. ↩︎
- Bonhams, The Andrew Crawforth Collection of Early Metalware and Works of Art, Edinburgh, 13 September 2021: lot 40, “Three fine and rare keys, 17th/18th century” (pierced and chiselled bows, one with a GR monogram), sold £7,650 including premium; press release (a group of 28 mostly continental 17th to 19th century keys sold for £8,288). ↩︎
- Railroadiana Online, “Fake railroad keys” (missing patina, unworn or restamped lettering, poor construction), checked 12 November 2026. ↩︎
- Soulis Auctions, A 50-Year Railroadiana Collection, 20 March 2021: lot 219, two brass switch keys stamped L&A RY, one marked Adlake, estimate $100–200, sold $70; lot 241, brass key stamped S.&NY.RR., signed Adlake, estimate $75–150, sold $120; lot 242, brass switch keys for Texas railroads, estimate $75–150, sold $120 (all prices before buyer’s premium). ↩︎
- Canadian Conservation Institute, “Basic care: iron objects” (2017). ↩︎
The History of Safes letter
One old safe a month, in your inbox
Once a month I send one safe worth a closer look, the new maker histories and a find from the patent and advert collection. Nothing else, and you can leave with one click.
You'll get a confirmation email first. One email a month, unsubscribe any time. Privacy policy.



