Most antique door locks are one of two kinds: a rim lock (or box lock) screwed to the face of the door, or a mortice lock set into its edge. Here’s how to tell them apart, who made them in Willenhall and New Britain, and how to put a rough date on the one on your door.
1830
patent behind the Carpenter rim lock, granted to James Carpenter and John Young
268
master locksmiths counted in Willenhall in 1841, plus 76 key-makers
31,500
dozen locks a week from the Wolverhampton district, as stated in 1866
1858
design patent for the cast “Pioneer Lock” plate of New Britain, Connecticut
Key takeaways
- A rim lock (often sold as a box lock) sits in a case on the inside face of the door. A mortice lock is hidden in a slot cut into the door’s edge, and only its plate and keyhole show.
- Early house locks were rim locks. Mortice locks took over in better rooms first, and an 1853 treatise already ranked them above iron and brass rim locks.
- Most old British door locks came from Willenhall, near Wolverhampton. The “Carpenter” rim lock with an up-and-down latch goes back to an 1830 patent and was copied by many makers.
- To date a lock, read the maker’s badge and any patent date first, then look at the case, the screws and the key. No single clue gives a year.
- A missing key is a job for a locksmith, who cuts a new key to the lock. Restored working iron rim locks sell for a few hundred pounds; fine early brass locks for more, up to thousands.
In This Article

Antique door locks at a glance
Start with where the lock sits. If you can see a whole metal or wooden box on the inside of the door, it’s a rim lock. If all you can see is a keyhole, a knob and a narrow plate on the door’s edge, the lock is buried in the wood, and that’s a mortice lock. The table sorts out the types you’re most likely to meet in an old house.
| Type | Where it sits | Period clues | Key |
|---|---|---|---|
| Stock lock | Wooden case on the face of the door | Made throughout the hand-made era; by 1853 used for stables, gates and back doors | Large bit key |
| Iron rim lock (box lock) | Iron case on the inside face, with a keeper on the frame | The earliest house locks were all rim fittings; still made in quantity in the 19th century | Bit key with a solid shank, working from both sides |
| Brass-case rim lock | Brass case on the inside face | The smarter version of the iron rim lock in 1853 | Bit key |
| Carpenter rim lock | Rim lock whose latch moves up and down | Patent of 1830; copied widely into the 20th century | Bit key |
| Mortice lock | Inside a slot cut into the door’s edge | Replaced rim locks in better rooms; the most elegant choice in 1853 | Bit key or lever key |
| Cylinder (pin tumbler) lock | Round cylinder through the door | Linus Yale Jr.’s improved cylinder lock was patented in 1865 | Small flat key |
The names come from the lock trade itself. Charles Tomlinson’s Rudimentary Treatise on the Construction of Locks of 1853 lists the room-door locks of the day as “the iron-rim, the brass-case, and the mortise lock”, wooden stock locks for outside doors, and a further set of names that counted bolts: a dead lock with one, a two-bolt lock, a three-bolt lock.1 The Northern Ireland guidance on historic doors says early locks “are all rim fittings”, that porcelain knob furniture was more common by 1800, and that “later mortice locks replaced the rim patterns”.2 The Yale pin-tumbler cylinder lock of 1865 is the ancestor of most modern front-door locks, so a lock with a small flat key is a later arrival on any old door.3
Rim locks and box locks
A rim lock is the one you can’t miss: a rectangular case screwed to the inside face of the door, with a knob or two, a keyhole and a keeper (the matching box on the frame) that the bolts shoot into. A conservator who restores church doors calls the big timber-cased rim lock “among the oldest” forms of lock.4
Tomlinson’s trade names tell you what you’re looking at. A draw-back lock for a street door had a bolt that could be locked by the key, held half out by a spring, or drawn back by a handle. Made of iron and carefully finished, it was an iron-rim lock; made of wood for back doors, a spring-stock lock. Locks were also sold as right-hand or left-hand, depending on which edge of the door they were fixed to.1
“Box lock” is the name you’ll see on dealers’ labels, and it isn’t a precise term. The Historic American Buildings Survey captions an iron rim lock on a Virginia front door as a “box lock”, while Tomlinson’s 1853 list uses “box” for a small cabinet lock made for a box, and the Willenhall makers he describes counted box locks and rim locks as separate lines.51 In practice, if it’s on a door and in a case, a box lock and a rim lock are the same animal.

Inside, most old rim locks were warded. The key’s bit has slots cut to pass fixed obstructions, the wards, and if the slots match, the key turns and throws the bolt. Tomlinson’s list even names locks after their wards: “one-ward round”, “two-wheel”, the L-ward and the T-ward, and a “plain” lock with no wards at all.1 The handles changed with fashion: early rim locks were mostly worked by iron or brass drop ring handles, and by 1800 knobs, often porcelain and highly decorated, had become more common.2
The Carpenter lock and its imitators
If you live in an older British house, there’s a fair chance one door still has a Carpenter lock. James Carpenter, born in 1775, came to Willenhall young and started making ironmongery there in 1795. On 18 January 1830 he and John Young of Wolverhampton were granted a patent for an improved latch bolt and lock.61 The two split it neatly: Carpenter took the rim lock rights and Young the mortice lock rights.6
Carpenter called his rim lock the “Number 60”, and it became known as “Carpenter’s lift up lock”. His idea was to make the latch move vertically instead of horizontally, which, the Wolverhampton lock gazetteer says, “renewed the vitality of the town’s staple industry”.6 American writers noticed the difference too: a Penn State history of the trade describes “the English ‘Carpenter’ lock in which the latch-bolt moved vertically instead of horizontally”.7 You can feel it in the hand. Turn the knob and the latch lifts rather than sliding back.
The firm built Summerford Works on New Road, Willenhall. After James Carpenter died in 1844, John Carpenter and James Tildesley, a local locksmith married to James’s daughter Harriet, inherited the business as Carpenter and Tildesley. The gazetteer gives 1851 for the change of name, but an 1845 Birmingham directory advert already uses it, so the name is older than first thought.68 Tildesley became sole owner in 1852, built up a large export trade to Australia, and in 1870 patented a double-handed rim lock, the J25, that could be fitted to a right-hand or left-hand door.6
Success brought copies. By 1888 the firm’s directory entry warned buyers about “spurious imitations fraudulently marked and numbered” and asked them to specify Carpenter and Tildesley make. By the time Clement Tildesley died in 1919, many Willenhall companies were making the No. 60, and Carpenter and Tildesley seems to have stopped.6 So “Carpenter” on a lock tells you the pattern, not always the maker. One genuine example crossed the Atlantic: the Historic American Buildings Survey photographed a Carpenter and Tildesley lock, with its round brass badge, on a door reused in the basement of Camden, a house in Port Royal, Virginia.9
Mortice locks
A mortice lock does the same job from inside the door. The joiner cuts a deep slot, the mortice, into the door’s edge, the lock slides in, and only the forend plate on the edge and the keyhole escutcheons on each face show. British usage spells it mortice; American catalogues and patents use mortise. Same lock.
Mortice locks were the upmarket choice for a long time. Tomlinson ranked room locks in 1853 as the iron-rim, then the brass-case, then the mortise lock: “the second supplants the first, and the third the second, as we advance in the elegance of the door-fittings.”1 Linda Hall’s survey of early door fittings notes that more sophisticated 18th-century houses had brass drop handles and “a more modern type of mortise latch contained within the door”.10 Rim locks didn’t vanish, though. In 1875 George Hayter Chubb wrote that warehouse and office doors were “usually fastened with a large rim or mortise lock of the ordinary kind”.11
Tomlinson’s trade also used the word for fixing. A cabinet lock was “straight” when screwed flat to the wood, “cut” when let in flush, and “mortise” when set into a cavity in the door’s edge.1 The British mortice lock most people know today, the lever deadlock with a stepped key, comes from the same family, and our page on what a Chubb key is explains why so many Britons still call that key a Chubb.
Warded, lever or cylinder: what’s inside
Rim or mortice describes where a lock sits. What makes it secure, or not, is the mechanism. We keep this to the principle and the history; if the lock is shut and the key is gone, that’s a locksmith’s job, not a reading exercise.
Oldest
Warded locks
Fixed wards block any key without the right slots. Tomlinson called the system “fallacious” because a cut-away key misses every ward.1 Most old interior door locks are warded.
From 1778
Lever locks
Moving levers must be lifted to exactly the right height. Barron patented the double-acting tumbler lock on 31 October 1778; Chubb’s detector lock followed in 1818.1
From 1865
Cylinder locks
Spring pins in a turning plug line up only with the right flat key. Linus Yale Jr.’s improved cylinder lock was patented on 27 June 1865.3
The warded lock’s weakness is why so many old keys look alike: a key with most of its bit cut away clears the wards of many locks, which is what a true skeleton key was. Our guide to antique skeleton keys covers the keys themselves. Lever locks answered the problem, and the most famous of them, Jeremiah Chubb’s detector lock, jammed itself if a lever was lifted too far. Joseph Bramah went further still with his lock of 1784,12 which has its own story in our history of Bramah locks.
It would be a shame if they did lock twice for that money.
G. B. Thorneycroft on twopenny Willenhall padlocks, as told by George Hayter Chubb, 1875
Willenhall and Wolverhampton: Britain’s lock towns
If your British door lock has no name at all, the safest guess is still the Black Country. Tomlinson wrote in 1853 that the neighbourhood of Wolverhampton was “the great storehouse whence locks are obtained”, and quoted a Portuguese traveller of about 1732 who called the town’s locksmiths “the most expert of that trade in England”.1 Wolverhampton was the trading centre, but the making happened three or four miles east, in Willenhall.1
R. H. Horne’s report for the children’s employment commission counted, in 1841, 268 master locksmiths in Willenhall, 76 key-makers, 14 bolt-makers and 13 latch-makers, not counting small masters too tucked away to be found. Directories showed each maker sticking to one kind of lock: a rim-lock maker, a trunk-lock maker, a mortice-lock maker. Many ran a second trade on the side, and the entries include a “Malt-Shovel tavern-keeper and rim-lock maker” and a “rim-lock and varnish maker”.1 Horne also found boys at the vice from the age of seven, and estimated at least a thousand of them at work in the town, chiefly on locks and keys.1 By 1855 there were 344 master locksmiths in Willenhall, according to the lock historian Pat Tempest.13
Quality varied, and the competition said so. Chubb, whose own lock works were in Wolverhampton,14 wrote in 1875 that besides the better locks of South Staffordshire there were “really trumpery locks made in abundance”, and gave the district’s output in 1866 as 31,500 dozen locks a week, much of it for export.11 Wolverhampton made safes as well as locks; our history of George Price and Cyrus Price of Wolverhampton follows one family of them.
You can still see what a family lock workshop looked like. The Locksmith’s House at 54 New Road, Willenhall, now run by the Black Country Living Museum, is an 1840 house displayed as it was in 1905. The Hodson family rented the workshops before buying the whole property in 1904, and Edgar Hodson carried on making bar padlocks and lighter locks there.1516 It opened to the public in 1987 and is run by volunteers, so check the museum’s events before you travel.15
Timeline
- c. 1732 A Portuguese visitor calls Wolverhampton’s locksmiths the most expert in England1
- 1778 Barron patents the double-acting tumbler lock (31 October)1
- 1830 James Carpenter and John Young of Wolverhampton patent an improved latch bolt and lock (18 January)61
- 1841 Willenhall has 268 master locksmiths and 76 key-makers1
- 1851 P. & F. Corbin takes that name in New Britain, Connecticut17
- 1858 Cornelius B. Erwin patents the “Pioneer Lock” plate design (10 August)18
- 1865 Linus Yale Jr. patents his improved pin-tumbler cylinder lock (27 June)3
- 1870 James Tildesley patents the double-handed J25 rim lock6
- 1902 Russell & Erwin and P. & F. Corbin come under the American Hardware Corporation19
American rim locks: cast iron and New Britain

In early America the rim lock was the everyday door lock. A Penn State history of the colonial trade, based on Henry Kauffman’s study of early metalworking, says “the most common type of door lock used in America is called a rim lock”, and describes stock locks with an oak case and iron parts from the hand-made period.7 English locks were fitted there too, as the Carpenter and Tildesley lock at Camden in Virginia shows.9
When American makers took over, they did it in factories. Tomlinson noticed in 1853 that the Willenhall workshop system was “very little practised in America”, where the factory system was carried further than in England.1 The centre of it was New Britain, Connecticut. Philip Corbin’s firm took the name P. & F. Corbin in 1851, and its neighbour and rival Russell & Erwin made builders’ hardware too.1719
Cast iron let the makers decorate the case itself. On 10 August 1858 Cornelius B. Erwin of New Britain was granted a design patent for a door lock plate he called the Pioneer Lock: “a western pioneer with his rifle, pack, and dog traveling in a forest”, cast in relief.18 It’s the kind of lock that makes you stop on the landing and look twice.
Names on American locks help with dating. In 1902 Russell & Erwin and P. & F. Corbin were brought together under the American Hardware Corporation as a holding company; the two brands kept advertising under their own names for about a century, and the business is now Corbin Russwin, part of ASSA ABLOY.19 Yale & Towne of Stamford, Connecticut, was patenting locks under that name by 1906.20 A firm can’t stamp a name before it has one, which is the most reliable dating rule there is.
How to date an antique door lock
We looked for a reference that dates door locks by appearance alone and didn’t find one we’d trust. The clues below add up; none settles a date on its own. Work from the most reliable to the least.
- The maker’s badge or name. Look for a brass badge or stamped name on the case. Check it against the firm’s dates: Carpenter and Tildesley from the 1840s, P. & F. Corbin from 1851, the American Hardware Corporation from 1902.61719 A plain “Carpenter” or “No. 60” may be a copy by another Willenhall maker.6
- A patent date or number. It gives the earliest possible date, not the date of making. The Pioneer Lock design, for example, was patented on 10 August 1858.18
- The case. A timber-cased lock belongs to the oldest family; iron came next, then brass for grander rooms, and mortice locks for the best doors.14 Linda Hall notes that genuinely old fittings show wear and irregularity, with thin iron, while Victorian and later work tends to have thicker iron and prominent fixings.10
- The screws. Hand-forged screws were expensive and rare in joinery; machine-made screws with blunt ends existed by the late 18th century, and modern pointed screws came from a Birmingham factory in the 1840s.21 Old locks are often refitted, so check that the screws look as old as the lock before you trust them.
- The latch and handles. A latch that lifts instead of sliding points to the Carpenter pattern, so after 1830.6 Drop ring handles are the earlier fitting; knobs, often porcelain, were more common by 1800.2
- The key. A large bit key with a solid shank fits a door lock worked from both sides; a small flat key belongs to a cylinder lock, a design patented in 1865.3
Spelling of the maker’s name, the typeface on the badge and the colour of the brass are worth photographing too. They won’t date a lock by themselves, but they help when you compare it with a catalogue or a museum piece. Got a lock or key you can’t place? Send us photos of the lock, its badge and its key through our identification form (it takes locks and keys as well as safes), and we’ll tell you what we can about the type, the maker and the likely age. We never make keys or open locks.
Every lock marked “Carpenter” was made by Carpenter and Tildesley.
By 1888 the firm was warning about fraudulently marked copies, and by 1919 many Willenhall makers were making the No. 60.
A mortice lock means a modern door.
Mortise latches were already fitted in sophisticated 18th-century houses, and in 1853 the mortise lock was the most elegant choice.
Copying the old key is the best way to replace a lost one.
A conservator who works on old church locks says it’s always better to have a new key cut to fit the lock than to copy a worn key.
Sources for the myths: the Wolverhampton lock gazetteer on Carpenter and Tildesley;6 Linda Hall and Tomlinson on mortise locks;101 and Jessica Burr on keys.4
Keys, repairs and keeping an old lock working
Lost the key? Call a locksmith, preferably one who does antique work. The Master Locksmiths Association says restoring old locks and keys is “a very specialist area”, that most antique locks were hand-made so parts can’t be bought, and that most locksmiths can cut an antique key to fit the old lock.22 In the US and Canada, the ALOA Security Professionals Association runs a find-a-locksmith service for consumers.23 A stiff or broken lock is locksmith work too: the MLA says replacing parts such as springs is a relatively simple job for an expert.22 We don’t give methods for opening a lock without its key.
Ask for the key to be cut to the lock. Jessica Burr, writing about Victorian church locks, puts it plainly: it is “always better to have a new key cut to fit the lock rather than copy an old key”, because a key copied from a worn original, or cut from a modern blank, can wear the lock. A key that wobbles from side to side or up and down in the keyhole is either worn or the wrong size.4
Day to day, old locks ask for very little. The Society for the Protection of Ancient Buildings says old knockers, knobs and locks contribute to a building’s character and that maintenance “will involve little more than occasionally oiling locks and hinges”.24 If the building is listed, check before swapping anything: the MLA points out that listed status may mean no new or modern products can be fitted.22 Where better security is needed, Burr describes keeping the original lock in use and adding a discreet modern lock as a second line, subject to the right consent.4 A warded rim lock was never high security, so that’s the honest compromise.
What are antique door locks worth?
Mostly tens to a few hundred pounds, with a long tail for early, signed or very decorative locks. The examples below are the ones we could check, and they’re all British; we didn’t find enough verifiable American sale records to give a US range.
| What sold | Where | Price |
|---|---|---|
| A collection of old locks, catalogued as 18th century | P & M Antiques, Cirencester (dealer, marked sold)25 | £35 |
| Wrought iron rim lock, c. 1830, restored, working with its key | Old Bakery Antiques (dealer, marked sold)26 | £220 |
| Late Victorian iron front-door rim lock, c. 1880, with key | Old Bakery Antiques (dealer, marked sold)27 | £270 |
| Late 18th-century brass rim lock with its original key | Westland London (dealer, marked sold)28 | £1,200 plus VAT |
| Engraved brass door lock signed by John Wilkes of Birmingham, late 17th century | Bonhams, London, 1 December 200929 | £6,600 |
The reasoning behind the spread: a plain lock with no key and no name is mostly worth its use as a working part, which is why loose locks go by the box. Restored, working rim locks with keys sell to people fitting out period houses, and they reach the low hundreds. Brass, an early date, a maker’s signature and fine engraving push prices up, and a signed 17th-century lock is bought as a work of art. It’s the same pattern as other small iron and brass collectables, from old money boxes and piggy banks to strongboxes: the name, the condition and the story do the work.
These are past sale and dealer prices, not valuations. Prices vary with condition, rarity, the key, the buyer and the sale, so treat any figure here as an informal guide and not a professional appraisal.
Frequently asked questions
What is a rim lock?
A lock in a case fixed to the inside face of a door, with a keeper on the frame that the bolts shoot into. The earliest house locks were rim locks, in wood, iron or brass cases.
What’s the difference between a rim lock and a mortice lock?
A rim lock sits on the surface of the door. A mortice lock sits inside a slot cut into the door’s edge, so only the plate on the edge and the keyholes show. Mortice locks gradually replaced rim locks, starting with the best rooms.
What is a Carpenter lock?
A rim lock whose latch lifts up and down instead of sliding sideways. It goes back to a patent of 1830 by James Carpenter of Willenhall and John Young of Wolverhampton, and many Willenhall firms later made copies of Carpenter’s No. 60.
How old is my door lock?
Look for a maker’s badge and a patent date first, then at the case material, the screws, the latch and the key. Together they usually give a period of a few decades, not a year.
Can I get a key for an antique door lock?
Yes. A locksmith who does antique work can cut a new key to fit the lock, and most can make one by hand. A new key cut to the lock is better than a copy of a worn old key.
Are antique door locks worth anything?
A box of plain old locks can sell for tens of pounds, restored working rim locks for around £200 to £300, and early signed or engraved brass locks for thousands. These are past prices, not valuations.
Sources:
- Charles Tomlinson (ed.), Rudimentary Treatise on the Construction of Locks, from the papers of A. C. Hobbs (London, 1853), ch. II (names of door locks: iron-rim, brass-case and mortise; dead, two-bolt and three-bolt locks; straight, cut and mortise fixing), ch. IV (warded locks and the skeleton key), tumbler locks (Barron, 31 October 1778), the Willenhall lock trade from R. H. Horne’s 1841 report, and the list of English lock patents (Carpenter and Young, 18 January 1830), via Project Gutenberg. ↩︎
- Department for Communities (Northern Ireland), “Technical note: Doors” (historic buildings guidance: rim fittings, knob furniture by 1800, mortice locks replacing rim patterns). ↩︎
- Linus Yale Jr., US Patent 48,475, “Improvement in locks”, 27 June 1865, via Google Patents. ↩︎
- Jessica Burr, “Victorian Locks”, Historic Churches, 2021, via BuildingConservation.com. ↩︎
- Historic American Buildings Survey, HABS VA-1227, Green Springs, Louisa County, Virginia: photograph 8, “Detail of box lock, interior of north front door”, Library of Congress. ↩︎
- Jim Evans and contributors, “A Gazetteer of Lock and Key Makers”, entry “Carpenter and Tildesley” (James Carpenter, patent No. 5880 of 1830 with John Young, the No. 60 lock, Summerford Works, Tildesley’s 1870 patent No. 2440, Kelly’s 1888 entry), Wolverhampton History & Heritage Website, historywebsite.co.uk, checked 15 November 2026. ↩︎
- Penn State, Medieval Technology and American History, “The Locksmith”, from The Smithy (Historic Bethlehem), drawing on Henry J. Kauffman, Metalworking Trades in Early America (1995). ↩︎
- Grace’s Guide, “Carpenter and Tildesley” (Summerford Works; Peck’s 1896–97 Birmingham directory; 1937 listing). ↩︎
- Historic American Buildings Survey, HABS VA-184, Camden, Port Royal, Caroline County, Virginia: photograph 32, “Carpenter and Tildesley lock on reused door in basement, from 18th-century house on site of present house”, William Edmund Barrett, 1980, Library of Congress. ↩︎
- Linda Hall, “Early and Vernacular Door Fittings”, The Building Conservation Directory, 1999 (author’s note 2008). ↩︎
- George Hayter Chubb, Protection from Fire and Thieves (London, 1875), ch. I: the warded lock “considered now to be old-fashioned”, warehouse doors fastened “with a large rim or mortise lock of the ordinary kind”, Willenhall’s cheap locks and the district’s weekly output in 1866, via Project Gutenberg. ↩︎
- Grace’s Guide, “Joseph Bramah” (patent 1430 for the lock, 21 August 1784). ↩︎
- Pat Tempest, “Victorian Locks and Locksmiths”, part 1 of A Gazetteer of Lock and Key Makers, The Victorian Web (344 master locksmiths in Willenhall by 1855; Willenhall as the centre for everyday locks). ↩︎
- The Chubb Archive, “A brief history of Chubb 1818–1990s” (workshop in Temple Street, Wolverhampton, from 1818). ↩︎
- Black Country Living Museum, “The Locksmith’s House” (54 New Road, Willenhall; house of 1840 shown as in 1905; the Hodson family; opened 1987), checked 15 November 2026. ↩︎
- Helen Taylor, “The Locksmith’s House”, History West Midlands (the Hodsons in lock-making from 1874; the move to New Road in 1904). ↩︎
- Amy Gagnon, “Philip Corbin: Manufacturing a legacy for New Britain”, ConnecticutHistory.org (Connecticut Humanities), 24 August 2013. ↩︎
- Cornelius B. Erwin, New Britain, Connecticut, US Design Patent 1,035, “Design for door lock plates” (the “Pioneer Lock”), 10 August 1858, via Google Patents. ↩︎
- New Britain Industrial Museum, “American Hardware” (Russell & Erwin and P. & F. Corbin; the American Hardware Corporation, 1902; Emhart, 1964). ↩︎
- Warren H. Taylor (assignor to the Yale & Towne Manufacturing Company, Stamford, Connecticut), US patent 814,335, “Changeable combination key lock”, granted 6 March 1906, via Google Patents. ↩︎
- Jonathan Taylor, “Nails and Wood Screws”, The Building Conservation Directory, 1999. ↩︎
- Master Locksmiths Association, “Antique lock and key repair or restoration”, checked 15 November 2026. ↩︎
- ALOA Security Professionals Association, aloa.org, “For consumers: find a qualified locksmith”. ↩︎
- The Society for the Protection of Ancient Buildings, “Doors” (old knockers, knobs and locks; occasional oiling), checked 15 November 2026. ↩︎
- P & M Antiques, Cirencester, “Antique Locks” (a collection of old locks), Antiques Atlas, marked sold, last listed at £35 (checked 15 November 2026). ↩︎
- Old Bakery Antiques, Wymondham, Leicestershire, “Georgian/Early Victorian Iron Rim Lock c.1830”, Antiques Atlas, marked sold, last listed at £220 (checked 15 November 2026). ↩︎
- Old Bakery Antiques, Wymondham, Leicestershire, “Victorian Iron Rim Lock With Key c.1880”, Antiques Atlas, marked sold, last listed at £270 (checked 15 November 2026). ↩︎
- Westland London, “A Simple Brass Rim Lock” (late 18th century, George III, with its original key), Antiques Atlas, marked sold, last listed at £1,200 plus VAT (checked 15 November 2026). ↩︎
- Bonhams, Antique Arms & Armour, Knightsbridge, 1 December 2009, lot 454, “A very rare English door-lock” by John Wilkes, Birmingham, late 17th century, sold for £6,600 including premium. ↩︎
The History of Safes letter
One old safe a month, in your inbox
Once a month I send one safe worth a closer look, the new maker histories and a find from the patent and advert collection. Nothing else, and you can leave with one click.
You'll get a confirmation email first. One email a month, unsubscribe any time. Privacy policy.



