A wall safe between studs hides well and costs little, but it has one awkward number to beat: about four inches of wall. Here’s what actually fits, what it’ll stop, and how to fit one without cutting a stud or a cable.
14½ in
clear space between studs set 16 inches apart
3½ in
actual depth of a 2×4 stud, and of the wall cavity
5 min
UL RSC, the shortest burglary test; no wall safe in our table carries even that
1914
a Chicago maker sells a wall safe “for frame houses and partition walls”
Key takeaways
- Studs 16 inches apart leave about 14½ inches of clear width, and a 2×4 wall about 4 inches of depth from the face of the drywall. Most between-stud safes are about 4 inches deep for that reason.
- Check the depth, not just the width: some safes sold for walls are 6½ to 10 inches deep and need a 2×6 wall or a box built out behind.
- None of the between-stud safes we found carries a UL burglary label or a fire rating. Their protection is being hidden, and their strength stops at the screws into the studs.
- Before cutting, check for cables, pipes and ducts, keep out of outside walls, and never cut a stud to make a safe fit.
In This Article

The short answer
A wall safe between studs is a shallow steel box that slips into the gap between two wall studs and screws to them. It’s good for passports, spare keys, cash for emergencies and the jewellery you wear every week. It isn’t a substitute for a heavy, bolted-down safe: it’s light, it’s thin, and once someone has found it, it’s held in by a handful of screws.
So buy one to hide things, not to defy anyone. Choose by depth first (does it fit your wall?), then the lock, then how it’s fixed. If your insurer or your valuables need a rated safe, our guide to choosing a jewellery safe explains why a floor safe bolted down in a closet is usually the better route. If you’d rather not cut into a wall at all, a safe bolted inside a nightstand or drawer does the same everyday job.
What fits between studs: the numbers
American houses have traditionally been framed with 2×4 studs set 16 inches on centre, and that’s still the usual spacing.12 A “2×4” isn’t two inches by four: the lumber standard puts a dry 2×4 at 1½ by 3½ inches.3 Take 1½ inches of stud from 16 inches and you get the space a wall safe has to fit: about 14½ inches across.
Depth is the harder number. The cavity is as deep as the stud, 3½ inches, and the drywall in front adds another half inch or so (half-inch and five-eighths boards are both standard).4 That’s why the between-stud safes in our table below are all about 4 inches deep. A 2×6 wall gives you 5½ inches of cavity, which is where the deeper models go.
Older and odder walls break the rules. Some are framed 24 inches on centre, which leaves a much wider bay to pack out.2 Even in a standard wall the fit is loose: SentrySafe’s instructions for its 7150 call for quarter-inch wooden shims nailed to the studs on 16-inch centres.5 The drawing on the right is the same idea in 1914: a box four inches deep, set into a wall five and a quarter inches thick.6

| Wall | Clear width between studs | Depth from the drywall face | What fits |
|---|---|---|---|
| 2×4 studs, 16 in on centre | About 14½ in | About 4 in | The usual 4-inch wall safe |
| 2×6 studs, 16 in on centre | About 14½ in | About 6 in | Deeper models, such as Gardall’s 6-inch GSL6000 |
| Studs 24 in on centre | About 22½ in | As above | A safe plus wooden packing, or a wider model |
What a wall safe stops, and what it doesn’t
A wall safe’s real defence is that nobody knows it’s there. Once it’s found, three things decide how long it lasts, and none of them is impressive on the safes sold for stud walls.
Steel
Thin by design
Doors on the 4-inch safes in our table run from 1/8 to 1/4 inch, and bodies from 16-gauge to 1/8 inch steel. A box that has to fit 4 inches can’t be much thicker.7891011
Fixing
Four screws
A typical install is four screws through the sides into the studs.12 Whatever the door resists, the whole box is only as firmly held as those screws and the wood they’re in.
Fire
No fire rating
None of the between-stud safes we found claims a fire rating. Insulation takes depth, and the one insulated wall safe we found with a fire label is 15¼ inches deep.13
The labels you’ll see, and what they mean
The lowest UL burglary label, UL 1037 RSC, means the safe resisted a five-minute attack by one technician with hand tools: pry bars, small hammers, and a drill bit no bigger than a quarter of an inch.1415 The standard adds that a container made to be fixed to the building is tested fixed the way it’s meant to be installed.15 So for a wall safe, the screws and the studs are part of the test. TL-15, the next serious label, is 15 minutes of working time against the door and front face.16 We didn’t find a between-stud safe carrying either. Our guide to TL-15, TL-30 and RSC ratings goes through each label.
Two other marks turn up in wall-safe listings. “B-rate” sounds like a test result but isn’t: it’s an old insurance construction class, and one dealer’s own explainer says plainly that no tests are given for it.1617 And a California DOJ listing means a safe meets the state’s minimum standard for a firearm safety device; the dealer selling the V-Line in our table calls it “NOT a TRUE burglar rating”.11
Wall safes between studs compared
These are current wall safes from seven makers, from the cheapest electronic box we found to a heavy-door safe that needs a deep wall. They’re listed by price, not ranked: we haven’t tested them, and the figures are the maker’s or the seller’s.
| Model | Outside, H x W x D | Steel | Lock | Rating claimed | Price seen |
|---|---|---|---|---|---|
| Hollon WSE-2114 | 22.2 x 14.9 x 4 in, with flange | 1/8 in door | Electronic, key override | None listed | $199 (Safe and Vault Store)7 |
| AMSEC WEST2114 | About 21 to 22 x 14 to 15 x 4 in (the listing gives two sizes) | 3/16 in door | Electronic, key override | None listed | $303.75 in a sale, list $405 (Safe and Vault Store)8 |
| Barska AX12038 | 20.75 x 15.43 x 3.73 in | Not stated | Fingerprint, two back-up keys | CA DOJ approved; not fireproof | $318.99 (WebstaurantStore)18 |
| V-Line Quick Vault 41214-S | 12 x 14 x 4 in (frame 17 x 15 in) | 14-gauge body | Five-button mechanical | CA DOJ listed | $345 (Safe and Vault Store)11 |
| Mycube In-Wall | 18 x 14.25 x 6.5 in | Not stated; 36 lb | Fingerprint | None published; not fire rated | $505 (Mycube)19 |
| Gardall GSL4000/F | 12.4 x 14.4 x 4 in (GSL6000/F for 6 in walls) | 1/4 in door, 1/8 in body | UL Group II mechanical | None for the safe itself | $521.25 in a sale, list $695 (NY City Safe)179 |
| AMSEC WS1214 | 12.6 x 14 x 10 in | 3/4 in solid steel door | Electronic; UL Group II dial optional | B-rate; no fire protection | $675 in a sale, list $900 (Safe and Vault Store)20 |
Read the depth column before anything else. Five of the seven are made for a 4-inch wall. The Mycube In-Wall is 6½ inches deep, deeper than a 2×4 wall and a little deeper than a 2×6 wall’s 6 inches, and its page doesn’t say whether that includes the keypad; ask how it’s meant to sit before you buy, or plan to fit it where you can build out behind the wall.19 The AMSEC WS1214 is 10 inches deep, and its seller warns that it needs more space behind it than most wall safes.20
What the extra money buys is mostly the door and the lock. Gardall’s GSL4000 has a 1/4-inch door and a UL-listed Group II mechanical lock, which needs no batteries; the WS1214’s door is 3/4-inch solid steel.1720 The cheaper boxes trade that for a keypad or a fingerprint reader and a thinner door. If the safe is mostly about hiding things, that’s a fair trade. Mycube’s is the one in the table designed to be looked at, with a fingerprint reader and a plain face; at the cheap end, a keypad and a picture frame do the same job.
How to fit a wall safe between studs
If you’ve hung a heavy shelf, you have most of the skills, but follow the maker’s instructions for your model. Here’s the order SentrySafe and This Old House give, with the building-code points to keep in mind.512
- Choose an inside wall. SentrySafe’s manual says to avoid exterior walls. A closet wall is the classic spot: easy to hide, and easy to reach from the other side if you need to.5
- Find the studs and look inside. Mark the studs, then cut a small inspection hole (This Old House suggests about 4 inches) and look for wires and pipes before you cut the full opening.12 SentrySafe adds phone and cable TV wires, heating ducts and plumbing to the list.5 Switch off the power to any outlet in that bay first.
- Check for blocking. Codes require fireblocks in stud walls at floor and ceiling level, and at least every 10 feet up a tall wall.21 If you hit a horizontal block in the bay, move the safe rather than remove it.
- Cut the drywall, not the studs. Use the maker’s template, keep it level, and cut along the inside faces of the studs. The code only lets a stud in a bearing wall be notched to a quarter of its width, so a safe that needs a stud cut is the wrong safe.22
- Shim, then screw. Pack any gap with wooden shims nailed to the studs, set the safe level with its flange flat on the wall, drill pilot holes (SentrySafe recommends 1/8 inch) and drive the screws through the mounting holes into the studs.5
- Add headers if you can. SentrySafe suggests fixing short horizontal headers between the studs above and below the opening, so the safe is anchored on all four sides instead of two.5
Take extra care with the wall between an attached garage and the house. Codes require gypsum board on the garage side to separate the two, so leave that layer intact, and ask your local building department if you’re unsure.21 If you don’t know what’s in the wall, a locksmith who fits safes can do the job.
“Fits between studs” means it fits my wall.
It means it fits the width. Check the depth: in our table it runs from 3.73 to 10 inches.
B-rate is a burglary test.
It’s an insurance construction class. No test is given for it.
A wall safe is fireproof because it’s inside the wall.
None of the between-stud safes we found claims a fire rating at all.
The safe behind the painting is a film cliché.
It was the makers’ own advice: a 1910 Meilink advert said to hide it “behind a picture”.
How we got here: the safe in the wall
Safes have been hidden in walls for as long as there have been safes worth hiding. In Great Expectations, published in 1861, Dickens gives the village tailor Mr Trabb “a prosperous iron safe let into the wall at the side of his fireplace”, and we’ve collected more like it in safes in literature.23 The between-stud safe is American, though, and it grew up with the apartment house.
- 1880 Nicholas Huetter of Kenosha, Wisconsin, patents a burglar-proof “closet or safe which may be concealed in a wall”.24
- 1902 Harvey C. Lowrie patents a wall safe for “apartment-house or hotel rooms”, anchored so it can’t be pulled out, with its door flush with the wall.25 That summer a New York apartment hotel advertises “steel wall safes” alongside telephones in every apartment.26
- 1905 Meilink of Toledo sells its small Improved Vault as “better than the old-fashioned, clumsy, heavy, wall safes”.27
- 1909 to 1910 Meilink changes its mind and patents wall safes of its own, one set into masonry while the house is built, one flush with the plaster.2829 Its 1910 advert prices them at “$14.00 and up, built in”, and says to hide one “behind a picture”.30
- 1914 Lowrie’s page in Sweet’s Catalogue shows a 4-inch-deep safe “for frame houses and partition walls”, the between-stud safe in all but name.6
- 1915 Montgomery Ward sells a steel wall safe for a 6-inch frame wall by mail for $9.85: “May be concealed behind a picture.”31 The same year an Essanay film, Thirteen Down, keeps its plans “in a wall safe concealed behind a picture frame”.32
- 1919 John and Joseph Rauwald of Milwaukee patent a fireproof wall safe made to sit “between and secured to a pair of adjoining wall joists”.33
- 1931 The young firm that became SentrySafe lands its first big order: 2,200 wall safes for Vassar College.34
- 1956 Ward’s catalogue sells a Meilink steel wall safe for $39.95, with “2 strong flanges for bolting to studs”.35
Put Lowrie’s 1914 safe next to today’s and two things have changed. Lowrie’s photograph shows a box of iron an inch thick held in a brick wall by anchor rods, and even its frame-wall Style A was set in cement, in a drawing that puts it in an outside wall with sheathing and clapboards behind.6 Today’s are steel an eighth of an inch thick or less, screwed to the studs, and SentrySafe tells you to keep them out of outside walls altogether.5 The hiding place is the same. Meilink’s history, from the $8 Home Deposit Vault to the wall safes, is in our Meilink safes entry.
Frequently asked questions
How wide can a wall safe be to fit between studs?
With studs 16 inches on centre, the clear gap is about 14½ inches, so the box behind the flange must be narrower than that. The flange can be wider, because it sits on the face of the wall.
How deep is a wall safe?
Most made for stud walls are about 4 inches deep, to fit a 2×4 wall. Some are deeper: 6½ inches for the Mycube In-Wall and 10 inches for the AMSEC WS1214, which need a 2×6 wall or a box built out behind.
Can I put a wall safe in an exterior wall?
SentrySafe’s instructions say to avoid exterior walls. Outside walls are usually insulated and load-bearing, and the code limits how far a stud in a bearing wall can be notched.
Are wall safes fireproof?
Not the between-stud kind: none we found claims a fire rating. Insulated wall safes with a UL fire label exist, but the one we found is over 15 inches deep. Our guide to safe fire ratings explains the labels.
Can a burglar pull a wall safe out of the wall?
A between-stud safe is held by a few screws into wood, so it’s only as strong as that fixing. Headers above and below help. Its real protection is not being found, so keep the location to yourself.
How much does a wall safe between studs cost?
From about $200 to $675 for the seven models in our table in November 2026, before fitting. The money mostly buys a thicker door and a better lock.
Sources:
- US Department of Energy, Building America Solution Center (PNNL), “Minimum wall studs” (houses traditionally framed with 2×4 studs at 16 inches on center; 2×6 at 24 inches in advanced framing). Accessed 19 November 2026. ↩︎
- American Wood Council, “Lumber studs” (“Stud spacing is normally 16 inches in exterior walls”; 24-inch spacing of 2×4 studs acceptable in one-story buildings with adequate sheathing). Accessed 19 November 2026. ↩︎
- National Institute of Standards and Technology, Voluntary Product Standard PS 20-20, American Softwood Lumber Standard, January 2020, Table 3, “Nominal and minimum-dressed sizes of boards, dimension, and timbers” (dry 2 in nominal = 1-1/2 in; 4 in = 3-1/2 in; 6 in = 5-1/2 in). Accessed 19 November 2026. ↩︎
- Residential Code of Ohio (IRC-based), Table 702.3.5, gypsum board on walls framed at 16 or 24 in on center (1/2 in and 5/8 in thicknesses listed). Accessed 19 November 2026. ↩︎
- SentrySafe (Master Lock), Model 7150 wall safe installation manual (PDF): “Avoid exterior walls”; check for electric, telephone and cable TV wires, heating ducts or plumbing; 1/4 in shims on 16 in centres; four screws and washers; 1/8 in pilot drill; headers between studs to anchor all four sides. Accessed 19 November 2026. ↩︎
- Sweet’s Catalogue of Building Construction, 1914, pp. 1804–1805, Lowrie Safe & Lock Mfg. Co., Chicago (Style A “for frame houses and partition walls”, 5-1/4 in wall, interior 4 x 10 x 11 in; “Styles A and F build into 5 1/2-inch wall”) and pp. 1806–1807, Meilink (wall safes “built into the finest apartments, flats and dwellings”). ↩︎
- Safe and Vault Store, Hollon WSE-2114 listing (22.19 x 14.94 x 4.00 in including the flange; 1/8 in steel door; electronic lock with key override; $199.00). Seen 19 November 2026. ↩︎
- Safe and Vault Store, AMSEC WEST2114 listing (4 in deep; 3/16 in steel door; DL6000 electronic lock with key override; fits between 16-inch wall studs; $303.75, list $405.00; the page gives two slightly different sets of dimensions). Seen 19 November 2026. ↩︎
- NY City Safe, Gardall GSL4000/F listing (1/4 in door and 1/8 in steel body; $521.25, list $695.00). Seen 19 November 2026. ↩︎
- Master Lock technical literature, SentrySafe 7150: exterior 15.9 x 15.9 x 4.2 in, 23 lb, 16-gauge steel cabinet, double-plate steel door, “Fits standard wall with studs on 16″ centers”. Accessed 19 November 2026. ↩︎
- Safe and Vault Store, V-Line Quick Vault 41214-S listing (12 x 14 x 4 in; 14-gauge body; five-button mechanical lock; fits between 16 in o/c studs; CA DOJ listed, “NOT a TRUE burglar rating”; $345.00). Seen 19 November 2026. ↩︎
- This Old House, “How to Install a Wall Safe” (4 in inspection hole; fasten the safe to the studs with the four screws provided). Accessed 19 November 2026. ↩︎
- Gardall Safe Corporation, Insulated Wall Safes catalogue, 1 November 2022 (WMS129: 17-1/4 x 14 x 15-1/4 in outside, 101 lb, U.L. 350°F one-hour label; add 1-1/2 in for dial and handle). Accessed 19 November 2026. ↩︎
- UL, “Residential Security Container Standard Revised”, 1 August 2017 (attack level one: a five-minute attack by one technician using common hand tools). Accessed 19 November 2026. ↩︎
- Intertek, Standards update notice, UL 1037, 6th edition (revision effective 23 August 2020), clauses 54.2.1 (resist for 5 minutes an attempt to open the door or make a hand-hole opening) and 54.2.6 (a container made to be attached to the building is installed as intended for the attack test). Accessed 19 November 2026. ↩︎
- Safe and Vault Store, “Burglary ratings” (dealer explainer: B-Rate “No tests are given to provide this rating”; TL-15 is 15 minutes net working time against the door and front face). Accessed 19 November 2026. ↩︎
- Gardall Safe Corporation, Heavy Duty Concealed Wall Safes catalogue, 1 November 2022 (GSL4000/F 12-3/8 x 14-3/8 x 4 in, 36 lb; GSL6000/F for 6 in walls; 1/4 in door; four 3/8 in anchor holes; Class B and C insurance ratings explained) and product page (“between 16″ on center wall studs”, U.L. Group II mechanical lock). Accessed 19 November 2026. ↩︎
- Barska, hidden safes catalogue (AX12038: outer 3.73 x 15.43 x 20.75 in, 120 fingerprints, two back-up keys, fireproof “No”, CA DOJ approved “Yes”, 28.6 lb) and WebstaurantStore listing ($318.99). Seen 19 November 2026. ↩︎
- Mycube, Mycube In-Wall (outside 18 x 14.25 x 6.5 in, inside 17.5 x 14 x 5 in, 36 lb, “Not fire rated”, fits between wall studs, bolts for securing to wall studs; $505). Seen 19 November 2026. ↩︎
- Safe and Vault Store, AMSEC WS1214E5 listing (outside 12.63 x 14.00 x 10.00 in; 3/4 in solid steel door; electronic keypad, optional UL-listed Group II dial; B-Rate; no fire protection; $675.00, list $900.00). Seen 19 November 2026. ↩︎
- Residential Code of Ohio (based on the International Residential Code), section 302: fireblocking of concealed stud spaces vertically at ceiling and floor levels and horizontally at intervals not exceeding 10 feet (302.11); garage separation of not less than 1/2-inch gypsum board on the garage side (Table 302.6). Accessed 19 November 2026. ↩︎
- Residential Code of Ohio (IRC-based), section 602.6: studs in exterior walls or bearing partitions may be cut or notched to no more than 25 percent of their width; studs in nonbearing partitions to no more than 40 percent. Accessed 19 November 2026. ↩︎
- Charles Dickens, Great Expectations, chapter 19. Project Gutenberg eBook #1400. ↩︎
- Nicholas Huetter, US Patent 232,036, “Burglar-proof safe”, filed 6 April 1880, granted 7 September 1880. ↩︎
- Harvey C. Lowrie, US Patent 711,326, “Wall-safe or lock-box”, filed 5 May 1902, granted 14 October 1902. ↩︎
- Advertisement for The Highlands, 91st Street and Lexington Avenue, The New York Times, August 1902 (“telephones in every apartment; steel wall safes; mail shutes”). ↩︎
- The Meilink Manufacturing Co., Toledo, advertisement for the Improved Vault, The World Almanac and Encyclopedia 1905 (“better than the old-fashioned, clumsy, heavy, wall safes”). ↩︎
- William H. Reynolds, assignor to the Meilink Manufacturing Company, US Patent 939,322, wall safe, filed 23 April 1909, granted 9 November 1909. ↩︎
- Charles F. Meilink and William H. Reynolds, US Patent 960,982, “Wall-Safe”, filed 12 April 1909, granted 7 June 1910. ↩︎
- Advertisement, “Meilink’s Steel Wall Safe”, The Literary Digest, 4 June 1910, p. 1154 (“Prices $14.00 and up, built in”; “Hide it in a closet, or behind a picture or piece of furniture if you like”). ↩︎
- Montgomery Ward & Co., Book of Homes, 1915, p. 75, “Steel Wall Safe, $9.85” (smallest size for a 6 in frame wall, 14 x 9-1/2 x 4 in; “May be concealed behind a picture”). ↩︎
- Review of Essanay’s Thirteen Down, Motography, 6 February 1915, p. 201 (“the plans in a wall safe concealed behind a picture frame”). ↩︎
- John and Joseph Rauwald, US Patent 1,297,492, “Fireproof wall-safe”, filed 17 June 1918, granted 18 March 1919 (“disposed between and secured to a pair of adjoining wall joists”). ↩︎
- Matthew Ballard (Orleans County Historian), “Albion native founded SentrySafe Company”, Orleans Hub, 26 September 2015. ↩︎
- Montgomery Ward, Spring and Summer catalogue 1956 (Albany), p. 701, “Meilink Steel Wall Safe”, $39.95 (“2 strong flanges for bolting to studs”). ↩︎
The History of Safes letter
One old safe a month, in your inbox
Once a month I send one safe worth a closer look, the new maker histories and a find from the patent and advert collection. Nothing else, and you can leave with one click.
You'll get a confirmation email first. One email a month, unsubscribe any time. Privacy policy.


