Closet Safes: What Fits, What the Floor Can Take and What They Stop

The closet is where most of us want the safe and where most burglars look first. That isn’t a reason to put it somewhere else; it’s a reason to pick one that fits through the door, suits the floor it stands on and is bolted to the house. Here’s how.

24 in

the usual depth of a reach-in closet, with shelves about 12 inches deep

155 psf

under a 365 lb gun safe’s 20 x 17 in base, on a bedroom floor designed for 30

2 of 8

safes in our table with an independent UL burglary rating

336 lb

what Chubb said a safe of 22 x 17 x 16 inches should weigh, in 1875

Key takeaways

  • Measure three things before you shop: the closet doorway, the depth of the closet (24 inches is the usual reach-in) and the room the safe door needs to swing open.
  • A closet safe is only as good as its bolts. Fix it to the floor and, where you can, to a wall stud; an unbolted box leaves in a burglar’s car.
  • Upstairs, a heavy safe is a point load on a wooden floor. Put it close to a bearing wall, across the joists, and ask an engineer about anything really heavy.
  • Read the fire claim carefully. A UL 72 label means an outside lab burned it; “1 hour at 1,200°F” on its own usually means the maker did.
1910 magazine advert for Meilink's Steel Wall Safe: a hand turns the combination dial of a round wall safe door, a jewellery box inside, beside text reading Hide it in a closet, or behind a picture
Meilink's Steel Wall Safe, advertised in The Literary Digest, 4 June 1910: "Hide it in a closet, or behind a picture or piece of furniture if you like." Public domain, via Internet Archive.

The short answer

A closet safe is any safe sized to live in a closet: a box on the shelf or the floor for papers, jewellery and cash, a tall gun safe that fills the end of a walk-in, or, at the far end, the whole closet turned into a small vault with a steel door. What they share is the room they sit in, and that room brings three problems: the doorway, the floor and the fact that burglars know where closets are.

The bedroom closet is still a sensible place for a safe, provided the safe is heavy enough, bolted down and honest about what it’s rated for. If you want something smaller, our guides to nightstand and drawer safes and wall safes between the studs cover the boxes that hide in furniture and walls.

Three kinds of closet safe

“Closet safe” covers very different boxes, from a 30-pound keypad box to a gun safe that needs a delivery crew. It helps to decide which one you’re shopping for before you look at a single product page.

Shelf or floor

A box for valuables

Small and front- or top-opening, made to sit on a shelf or the closet floor. Papers, jewellery, cash, a handgun. Easy to carry in, and easy to carry out unless it’s bolted.

Standing

A gun or home safe

A tall safe on the closet floor, from a slim long-gun cabinet to a 600-pound fire-rated safe. This is where the doorway, the floor and delivery start to matter.

The room

A closet turned vault

A steel vault door in place of the closet door, sometimes with reinforced walls. Lots of room inside, but the walls are only as strong as what they’re built from.

One word causes most of the confusion. In the trade, a floor safe is a safe set into the floor, usually into concrete, with only its lid showing. Some modern brands, Mycube among them, use “floor safe” for a tall safe that simply stands on the floor.1 Both can go in a closet, but they’re different jobs: one needs a concrete slab and a builder, the other needs a doorway and some friends.

Measure first: doorway, depth and door swing

A safe that won’t go through the closet door is the most expensive mistake on this page. Closets are built small. A reach-in closet is usually 24 inches deep and can be as shallow as 20, with shelves around 12 inches deep.2 Interior doors are normally 80 inches high, and closet doors can be 78; the narrow 24-, 28- and 30-inch doors you can buy off the shelf are almost always meant for closets.3

MeasureTypical figureWhat to check
Doorway height80 in; closet doors sometimes 78 inTall closet safes in our table are 53 to 59 in, so they go in standing up. Check the stairs and hallway corners on the way.
Doorway width24 to 30 in for many closet doorsMeasure the clear gap between the door stops, not the door. A 20 in wide safe usually goes through; a 24 in one may not.
Closet depth24 in; as shallow as 20 inAdd the handle and keypad to the safe’s depth: a 17 in Stealth UL14 is nearly 20 in with its handle.
Shelf depthAbout 12 inMycube’s Top-Open is 13½ in deep and AMSEC’s CS1620 13 in: both overhang a standard shelf.
Door swingAbout the width of the safe doorThe door must open past the closet frame and the clothes far enough to reach inside.
FloorConcrete slab or wooden joistsDecides the anchors you need and, for heavy safes upstairs, where the safe can go.
Closet and door figures from Dimensions.com and Bob Vila; safe sizes from the makers’ and sellers’ pages, checked 20 November 2026.

Liberty Safe’s advice for a walk-in is to put the safe on the short wall at the far end, so its door opens into the aisle rather than into the hanging clothes, and to measure the handle and the door swing before you build any shelving round it.4 In a reach-in closet the problem is usually the opposite: the safe fits, but its door can’t open fully past the closet’s door frame. Draw the safe door’s arc on the floor with tape before it’s delivered.

Closet safes compared

These are eight current safes that suit a closet, from a $460 fire box for the closet floor to a 251-pound fire-resistant gun safe. They’re listed by price, not ranked: we haven’t tested them, and every figure is the maker’s or the seller’s. Mycube’s prices are from its Black Friday sale, which it says runs to 4 December 2026.5

ModelOutside, H x W x DSteelWay inRating claimedPrice seen
Hollon HS-500E19.4 x 13.8 x 16.8 in; 121 lbNot statedKeypad; 4 AAFire: 2 hours at 1,850°F, lab not named. No burglary rating$460 (Safe and Vault Store)6
Mycube Top-Open10.5 x 19.5 x 13.5 in; 40 lb⅛ in rolled steelFingerprint (10) or code, backup key; 4 AANone; “Not fire rated”$463 in a sale, list $545 (Mycube)7
Sports Afield GC10 cabinet53 x 18.25 x 12.5 in; 55 lb19-gaugeKeyCA DOJ. Not fire rated$499.99 (Safe and Vault Store)8
AMSEC CS1620 Closet Safe16 x 20 x 13 in; 75 lb16-gaugeElectronic, hidden backup keyholeFire: 30 min at 1,200°F (see below). CA DOJ$671.25 in a sale, list $895 (Safe and Vault Store)9
AMSEC BFS1512E120.1 x 17.1 x 19.4 in; 278 lb½ in steel plate doorElectronicUL RSC. Fire: 60 min at 1,200°F, ETL verified$1,361.25 in a sale, list $1,815 (Safe and Vault Store)10
Stealth UL1455 x 20 x 17 in; 365 lb12-gaugeElectronicUL RSC. Fire: 60 min at 1,200°F, lab not named$1,399.99 (Safe and Vault Store)11
Mycube Max Classic57 x 15.75 x 12 in; 105 lb⅛ in wallsFingerprint (10) or code, backup keys; mains and batteryNone; “Not fire rated”$1,695 in a sale, list $1,995 (Mycube)12
Mycube Max Grand Fire59 x 20 x 20 in; 251 lbSteel walls, fireboardFingerprint (10) or code, backup keys; mains and battery“One-hour fire resistance”, no temperature or lab given$3,145 in a sale, list $3,595 (Mycube)13
Figures from the maker’s or seller’s page, checked 20 November 2026. Prices change with sales. We haven’t tested these safes.

Mycube Top-Open and Max: shelf and floor

Mycube makes two kinds of closet safe. The Top-Open is a 10½-inch-tall box that opens from the top, in three widths: the Mini at 15½ inches and $403, the standard at 19½ inches and $463, and the Plus at 23½ inches and $522, all 13½ inches deep and 35 to 50 pounds.7 They have ⅛-inch rolled steel bodies, a fingerprint reader for ten prints, a code and a backup key, and holes in the back and the bottom so you can bolt them to both a wall and a floor.75

The Max is the tall one: 57 to 59 inches high, 105 to 183 pounds, for six to twelve long guns, running on mains power with a rechargeable battery.12 The Max Fire versions add fireboard and weigh 210 to 251 pounds, and the Max Grand Fire takes twelve long guns.13 Three things to weigh before buying. Mycube’s FAQ says plainly that its safes “do not carry a UL rating”, and the Max Fire pages give “one-hour fire resistance” without a temperature or a test lab.113 They’re light for their size: the Max Grand Fire is 251 pounds where the smaller Stealth UL14 is 365, so the bolts matter even more. And while the product pages say “lifetime”, the warranty page itself reads “1 Year Limited Warranty and Lifetime Parts Guarantee”.14 Mycube’s white-glove delivery places the safe but doesn’t bolt it down.1

AMSEC Closet Safe: made for the shelf

AMSEC sells the only range we found that’s actually called “Closet Safe”: the CS1215, CS1815 and CS1620, sized for a closet shelf and fixed through the back to a wall. Only the CS1620 claims a fire rating, 30 minutes at 1,200°F, and it’s listed for California DOJ.9 AMSEC’s own page calls that a “factory fire rating” in one place and “Independent” in its spec table, so ask the dealer which it is.15 The CS1815 has a heavier 9-gauge door but, in the dealer’s words, is designed “for security and concealment, not fire resistance”.16 The CS1815 and CS1620 are 13 inches deep, a little more than the usual 12-inch shelf.

With independent ratings: AMSEC BFS1512E1 and Stealth UL14

If you want a third party’s word on burglary as well as fire, two safes in the table have both. The AMSEC BFS1512E1 is a 278-pound cube for the closet floor with a half-inch steel plate door, a UL RSC rating and an ETL-verified hour at 1,200°F.10 The Stealth UL14 is the gun safe version: 55 inches tall, 20 wide and 17 deep, 12-gauge steel, UL RSC, 365 pounds; its dealer calls it “one of the only UL RSC Rated Gun Safes that perfectly fits within a closet”. Its fire claim names no lab.11 For more room, AMSEC’s NF5924 adds an ETL-verified 90 minutes, but at 24 inches wide and 600 pounds it’s a job for a delivery crew.17

A fire box for the closet floor

Hollon’s HS-500E is the cheapest way to fire protection in the table: a tall, narrow 121-pound box quoted at two hours at 1,850°F, with one anchor hole in the base. The dealer’s page doesn’t name the lab, and the safe has no burglary rating.6 As one dealer’s own guide to fire ratings puts it, in-house tests “are not verified by a third party”.18

If it won’t go up the stairs: a modular safe

A modular safe solves the doorway problem by arriving in pieces. Steelhead Outdoors’ Nomad 26 is 25½ inches wide, 54 tall and 18 deep and weighs 375 pounds assembled, but no single panel weighs more than 100 pounds, and the bolts that hold it together can only be reached from inside. Its maker pitches it at “tighter spaces like apartments, townhomes, closets”, with a 7-gauge steel door, a 12-gauge outer body over a steel liner, and a 30-minute fire rating; no test lab or UL rating is given.19 At 18 inches deep it leaves room for the handle in a standard 24-inch reach-in closet. At $2,700 it costs nearly twice as much as the Stealth UL14; what you’re paying for is a heavy safe in a room that a one-piece safe can’t reach.

Turning the closet into a vault

The last option replaces the closet door. SnapSafe’s 75416 vault room door, for example, is a 330-pound, 12-gauge steel door for a standard 32-inch door opening, made for an 82 by 34 inch rough opening, at $1,944.99 in a sale; no fire rating is given.20 Steelhead’s Homestead is a heavier 7-gauge door lined with a ceramic fire blanket, at $6,000, but its standard frame is made for 8-inch block walls; for a wood-framed closet it’s built to order, with a lead time of 10 to 12 weeks.21 The catch is the walls. Liberty points out that an ordinary closet is 2×4 studs and drywall, which anyone who knows what’s behind the door can cut through.22 A vault door on a drywall closet keeps out children and casual thieves; for more than that, the walls need work too.

Will the floor take it?

On a concrete slab, almost certainly. Upstairs, on wooden joists, it depends on the safe. US houses built to the International Residential Code are designed for a live load of 30 pounds per square foot in bedrooms and 40 in other rooms.23 That’s an average spread over the whole floor; a safe puts its weight on a few square feet.

SafeEmpty weightBase, W x DLoad under it
Mycube Max Grand Fire251 lb20 x 20 in (2.8 sq ft)About 90 psf
Stealth UL14365 lb20 x 17 in (2.4 sq ft)About 155 psf
AMSEC NF5924600 lb24 x 18 in (3 sq ft)About 200 psf
Empty weight over the outside footprint, from the makers’ and sellers’ pages; guns and contents add more. Our arithmetic, not an engineering assessment.

That doesn’t mean the floor gives way. The joists share the load, and one US safe dealer points out that the design figure is a minimum spread from wall to wall, not a limit for any one spot.24 What the safe trade and Liberty agree on is where to put the weight: close to a load-bearing wall, at right angles to the joists so it sits across as many of them as possible, and for heavy safes on wooden floors, a word with a structural engineer.2425 Blocking between the joists or a steel plate under the safe spreads the load further.24 None of this is needed for a 40-pound box on a shelf; it’s needed for the 600-pound gun safe.

What a closet safe will and won’t stop

Start with the uncomfortable bit. Liberty Safe, a big US gun safe maker, tells its own customers that intruders “check the most obvious locations first”, and the first example it gives is the master bedroom closet.25 So a closet safe isn’t hidden. Its job is to stay put and to take longer to open than the burglar wants to spend in your house.

Burglary ratings

The lowest independent burglary test for a home safe in the US is UL 1037’s residential security container (RSC) rating: one technician, common hand tools, five minutes to open the door or make a hole you can get a hand through.2627 It’s a modest bar, but it’s tested by someone other than the seller. A “B-rate” in a listing isn’t a test at all; one big US dealer says plainly that no tests are given for it.28 Our guide to RSC, TL-15 and TL-30 explains the whole ladder.

Fire ratings, and why upstairs matters

Fire is the better reason to buy a big closet safe, and the place where the labels need the closest reading. A UL 72 rating means an outside lab has burned the safe and checked that the inside of a Class 350 unit stayed below 350°F for the rated time.29 Many gun safes instead quote their maker’s own furnace test: Liberty, for one, says its testing is “based” on US Department of Commerce guidelines, with the furnace held at 1,200°F.30 That’s not worthless, but it isn’t the same thing, and our guide to safe fire ratings goes through the differences.

Upstairs closets add one more test to look for. UL 72 has an optional impact test in which the safe is taken hot from the furnace, hoisted 30 feet and dropped, “to simulate a fall from three stories”, then put back in the fire.31 A closet safe on an upper floor is exactly the safe that might fall through a burning floor. Chubb made the same point in 1875: a safe in a burning house will by the end have “fallen into rubbish” or be buried by “the débris from above”.32

Did you know?

Chubb wrote in 1875 that no safe inside a strong-room had, to his knowledge, ever been destroyed by fire, but many in warehouses and offices had had their contents burnt, and those were “always light ones”.32 Weight and a protected room were his whole answer to fire.

Bolting it down in a closet

Every safe in our table has holes for anchor bolts, and every one of them is easier to steal without the bolts in. Liberty’s advice for a closet is to bolt the safe to the floor and, ideally, to the wall studs as well.22 Liberty also warns that a safe that isn’t anchored can be tipped over for leverage on the door, or carted away and opened somewhere else.25

  1. On concrete: concrete anchors through the floor holes, after cutting back the carpet and pad so the safe sits on the slab and can’t rock.
  2. On a wooden floor: lag bolts through the subfloor into a joist, not just into the plywood. Find the joists first; at 16 inches on centre, any safe more than 16 inches across sits over at least one.24
  3. Into the wall: through the back of a standing safe into one or two studs. It stops the safe being tipped over, which is how a thief gets leverage on the door.

Two closet extras are worth planning at the same time. A power outlet inside or near the closet runs a dehumidifier rod or interior light, and Liberty lists humidity alongside door swing as something to plan for in a closet.4 And the closet door itself: most residential closet doors are hollow-core, so a solid door with a lock helps keep children out, though it won’t slow a burglar much.22

Closet gun safes

Most tall closet safes are sold as gun safes, and many people searching for a “closet rifle safe” want a slim steel cabinet that fits behind the clothes. Those cabinets are fine for keeping children and visitors away from long guns, which is the job most storage laws care about: as of 2025, 35 states and the District of Columbia had child-access prevention laws of some kind, and licensed dealers must supply a storage or safety device with every handgun they sell.3334 A thin cabinet isn’t a burglary safe, though, and it isn’t fire rated.

Sports Afield’s GC10 is a typical example: 53 inches tall and 12½ deep, 55 pounds of 19-gauge steel with a key lock, California DOJ certified and, as its dealer says, not fireproof.8 For a closet that has to stand up to a burglary or a fire, the Stealth UL14 or Mycube’s Max Fire in the table are the step up. For a handgun only, a smaller box will do; our pistol safe guide compares them, including the recall record of small biometric safes.

From the strong-room to the closet: a short history

The closet safe is a small version of a very old idea. In 1875 George Hayter Chubb, of the lock and safe firm, wrote that for any bank, mansion or warehouse the basement “is undoubtedly the right position” for a strong-room, and added with some honesty that “the best place happens to be often rather inconvenient”.35 A room on the ground or first floor, he warned, “has to depend for support on what is not a strong-room”. He also wanted it kept dry, since damp in a closed room was “endless” trouble. Floor, damp, convenience: the three things you’re still weighing when you pick a closet.

He had a simple test for the safe itself, too. “A tolerably correct guide in the purchase of a safe is its weight,” he wrote, and a safe of 22 by 17 by 16 inches should weigh “about” three hundredweight, which is 336 pounds.36 Today’s AMSEC BFS1512E1 is close to that size, 20 by 17 by 19 inches, and weighs 278 pounds; Mycube’s Top-Open, at 10½ by 19½ by 13½ inches, weighs 40.107 Modern steel and fireboard aren’t Victorian iron and composition, so the rule doesn’t carry over exactly, but it still tells a safe from a steel box in seconds.

Timeline

  • 1865 Thieves tunnel sixty feet under the Central Bank of Western India in Hong Kong and come up through the strong-room floor. Chubb uses it to show that a floor isn’t safe just because it’s a floor.35
  • 1875 Chubb’s Protection from Fire and Thieves puts the strong-room in the basement, judges a safe by its weight and warns against tests not run by “persons quite disinterested”.353632
  • 1880 Nicholas Huetter of Kenosha, Wisconsin, patents a burglar-proof “closet or safe which may be concealed in a wall”.37
  • 1910 Meilink of Toledo sells its steel wall safe from $14 “built in”, with the advice “Hide it in a closet”.38
  • 2002 California requires a DOJ-approved safety device, or a qualifying gun safe, with every firearm sold in the state.39
  • 2026 Liberty Safe tells customers the master bedroom closet is among the first places a burglar looks, and that the safe must be anchored wherever it goes.25

Between Meilink’s “Hide it in a closet” and Liberty’s warning sits most of what has changed. A closet was once a hiding place; now it’s the first place anyone looks, so the safe in it has to work in plain sight.

A safe in the closet is hidden.

The bedroom closet is one of the first places a burglar checks. Plan for the safe being found.

It’s too heavy to steal, so it doesn’t need bolting.

It came in on a dolly; it can leave on one. Bolts are what make weight count.

“Fire rated for 60 minutes” means the same on every safe.

Look for who ran the test. UL 72 is an outside lab; many gun safe ratings are the maker’s own furnace.

A “floor safe” stands on the floor.

Traditionally it’s set into the floor, lid flush with the concrete. Check which one a listing means.

Frequently asked questions

What size safe fits in a closet?

For a reach-in closet, think 20 inches deep or less including the handle, since the closet itself is usually 24. On a shelf, a standard 12-inch shelf is shallower than most closet safes, including Mycube’s Top-Open at 13½ inches and AMSEC’s CS1620 at 13. Always check the doorway on the way in.

Can I put a gun safe in an upstairs closet?

Usually, yes. Place it close to a load-bearing wall and across the joists, and for a heavy safe on a wooden floor, ask a structural engineer. A 365-pound safe on a 20 by 17 inch base puts about 155 pounds per square foot on the floor beneath it.

Is the bedroom closet a good place for a safe?

It’s convenient, and it’s where burglars look first, so the safe has to be bolted down and strong enough to be found. If you can, a less obvious closet, or a basement on a concrete slab, makes the burglar’s job harder.

Do closet safes need to be bolted down?

Yes. Bolt it to the floor through the anchor holes, into a joist or the slab, and to a wall stud if the safe has holes in the back. Delivery services often don’t include it; Mycube’s white-glove delivery, for one, doesn’t.

Are closet safes fireproof?

Some are fire rated, many aren’t. In our table, Mycube’s Top-Open and Max and the Sports Afield cabinet aren’t fire rated at all. Look for who did the test: a UL 72 label or an ETL verification is an outside lab; a bare “60 minutes at 1,200°F” is often the maker’s own furnace.

Can I turn a closet into a vault?

You can fit a vault door to a closet, for example one made for a standard 32-inch door opening. The door is strong; the drywall walls beside it aren’t, so for real protection the walls need reinforcing too.

How we put this together: we haven’t tested these safes. Sizes, weights, ratings and prices come from the makers’ and sellers’ pages, checked on 20 November 2026, and the house figures from building codes and published guides. Where a maker’s pages disagree with each other, we say so. Our method is set out in how we research modern safes.

Sources:
  1. Mycube, FAQs (“The other Max and Max Fire floor safes are crated on a pallet”; “Mycube safes do not carry a UL rating”; on White Glove delivery, “bolting the safe down and setting your passcode are not” included). Accessed 20 November 2026. ↩︎
  2. Dimensions.com, “Reach-In Closets” (standard depth 24 in, as narrow as 20 in; shelves 12 in deep). Accessed 20 November 2026. ↩︎
  3. Glenda Taylor, “Standard Door Size 101”, Bob Vila, updated 15 November 2023 (interior passage doors 80 in high, closet doors sometimes 78 in; 24, 28 and 30 in doors “almost always reserved for closets”). Accessed 20 November 2026. ↩︎
  4. Jake Shaw, “Closet Safe Integration Examples”, Liberty Safe blog, 17 November 2026 (put the safe at the end of a walk-in closet so the door opens into the aisle; plan for door swing, power and humidity). Accessed 20 November 2026. ↩︎
  5. Mycube, “Compare safes” (“Encased in ⅛ inch-rolled steel”; Max walls “1/8 inch-thick”; “Black Friday: 15% off safes through December 4, 2026”). Accessed 20 November 2026. ↩︎
  6. Safe and Vault Store, Hollon HS-500E listing (outside 19.38 x 13.75 x 16.75 in, 121 lb, keypad, “2-hour fire rating tested at 1,850 degrees Fahrenheit”, testing lab not named, one anchor hole; $460). Accessed 20 November 2026. ↩︎
  7. Mycube, Mycube Top-Open (outside 10.5 x 19.5 x 13.5 in, inside 8.1 x 19 x 13 in, 40 lb, “Not fire rated”; two holes on the back and four on the bottom; $463 in a Black Friday sale, list $545; Mini 10.5 x 15.5 x 13.5 in, 35 lb, $403, list $475; Plus 10.5 x 23.5 x 13.5 in, 50 lb, $522, list $615). Accessed 20 November 2026. ↩︎
  8. Safe and Vault Store, Sports Afield GC10 10-gun cabinet listing (outside 53 x 18.25 x 12.5 in, 55 lb, 19-gauge steel, key lock, California DOJ certified, bolt-down kit, “not fireproof or waterproof”; $499.99). Accessed 20 November 2026. ↩︎
  9. Safe and Vault Store, AMSEC CS1620 Closet Safe listing (outside 16 x 20 x 13 in, 75 lb, 16-gauge steel, 30-minute fire rating, “CA DOJ firearm rating”, rear wall mounting; $671.25 in a sale, list $895). Accessed 20 November 2026. ↩︎
  10. Safe and Vault Store, AMSEC BFS1512E1 listing (outside 20.13 x 17.13 x 19.38 in, 278 lb, 1/2 in steel plate door, UL RSC, “ETL Verified Fire protection of 1200 degrees F for 60 minutes”, one anchor hole; $1,361.25 in a sale, list $1,815). Accessed 20 November 2026. ↩︎
  11. Safe and Vault Store, Stealth UL14 listing (outside 55 x 20 x 17 in plus 2¾ in for handle and lock, 365 lb, 12-gauge door and body, UL RSC, “60 Minute Fire Rating at 1200 degrees F” with no lab named, 14 guns, four bolt-down holes; “one of the only UL RSC Rated Gun Safes that perfectly fits within a closet”; $1,399.99). Accessed 20 November 2026. ↩︎
  12. Mycube, Mycube Max Classic (outside 57 x 15¾ x 12 in, 105 lb, 6 long guns, “Not fire rated”, mains power with rechargeable battery; $1,695 in a sale, list $1,995; Select 59 x 15¾ x 15 in, 148 lb; Plus 59 x 20 x 15 in, 168 lb; Grand 59 x 20 x 20 in, 183 lb, $2,460, list $2,895). Accessed 20 November 2026. ↩︎
  13. Mycube, Mycube Max Grand Fire (outside 59 x 20 x 20 in, 251 lb, 12 long guns, “One-hour fire resistance” with no temperature or test lab given, 2 pre-drilled bolt holes; $3,145 in a sale, list $3,595; Max Classic Fire 57 x 20 x 14⅛ in, 210 lb, $2,375). Accessed 20 November 2026. ↩︎
  14. Mycube, warranty page (“1 Year Limited Warranty and Lifetime Parts Guarantee”; after one year, replacement parts only). Accessed 20 November 2026. ↩︎
  15. American Security (AMSEC), Signature Vault (sold by dealers as the CS1620: “30-minute factory fire rating at 1200°F” in the features, “Independent 30-minutes” in the spec table; drywall fire-resistant construction; 1 year parts and labour warranty). Accessed 20 November 2026. ↩︎
  16. Safe and Vault Store, AMSEC CS1815 Closet Safe listing (outside 18 x 15 x 13 in, 43 lb, 14-gauge body, 9-gauge door; “designed primarily for security and concealment, not fire resistance”; $558.75 in a sale). Accessed 20 November 2026. ↩︎
  17. Safe and Vault Store, AMSEC NF5924 listing (outside 59 x 24 x 18 in, 600 lb, UL RSC, ETL-verified 90-minute fire rating at 1,200°F; $2,208.75 in a sale, list $2,945). Accessed 20 November 2026. ↩︎
  18. Safe and Vault Store, “Fire ratings” (dealer explainer: in-house tests “are not verified by a third party”). Accessed 20 November 2026. ↩︎
  19. Steelhead Outdoors, Nomad 26 (outside 25.5 x 54 x 18 in; 375 lb assembled, “each panel weighs less than 100lbs”; body assembly bolts “only accessible from the interior”; 12-gauge outer body with 20-gauge liner, 7-gauge door; “30 minute fire rating” with no lab named; “ideal for tighter spaces like apartments, townhomes, closets”; 6 to 15 long guns; made in the USA; $2,700). Accessed 20 November 2026. ↩︎
  20. Safe and Vault Store, SnapSafe 75416 vault room door listing (“Designed for a 82″ H x 34″ W rough opening”, for a standard 32 in door opening, 330 lb, 12-gauge door and frame, no fire rating stated; $1,944.99 in a sale, list $2,749.99). Accessed 20 November 2026. ↩︎
  21. Steelhead Outdoors, Homestead Vault Door (7-gauge construction, 1 in ceramic blanket fire insulation; frame “designed for easy installation into 8-inch block walls”, custom builds for “wood walls”; built to order, “lead time is 10-12 weeks”; $6,000). Accessed 20 November 2026. ↩︎
  22. Kyle Clouse, “Turning a Closet Into a Gun Safe: Is it Safe?”, Liberty Safe blog, 8 June 2023 (bolt a free-standing safe to the floor and “ideally, to the wall studs”; “Most residential closet doors are hollow-core”; written by a safe maker). Accessed 20 November 2026. ↩︎
  23. Residential Code of Ohio (based on the International Residential Code), Table 301.5, “Minimum uniformly distributed live loads”: sleeping rooms 30 psf, rooms other than sleeping rooms 40 psf, via Cornell Legal Information Institute. Accessed 20 November 2026. ↩︎
  24. Dean Safe Co., “Will My Raised Floor Support a Safe?” (dealer guide: joists usually 16 in on centre; place the safe close to a bearing wall and across the joists; blocking or a steel plate to spread the load), undated. Accessed 20 November 2026. ↩︎
  25. Jake Shaw, “Planning Your Safe Placement: Balancing Accessibility and Security”, Liberty Safe blog, 17 November 2026 (intruders “check the most obvious locations first”, like “the master bedroom closet”; on wood-joist floors place the safe against a load-bearing wall across several joists; a structural engineer for heavy safes). Accessed 20 November 2026. ↩︎
  26. UL, “Residential Security Container Standard Revised”, 1 August 2017 (attack level one: a five-minute attack by one technician using common hand tools). Accessed 19 November 2026. ↩︎
  27. Intertek, Standards update notice, UL 1037, 6th edition (revision effective 23 August 2020), clauses 54.2.1 (resist for 5 minutes an attempt to open the door or make a hand-hole opening) and 54.2.6 (a container made to be attached to the building is installed as intended for the attack test). Accessed 19 November 2026. ↩︎
  28. Safe and Vault Store, “Burglary ratings” (dealer explainer: B-Rate “No tests are given to provide this rating”; TL-15 is 15 minutes net working time against the door and front face). Accessed 19 November 2026. ↩︎
  29. John E. Hunter, “Filing Cabinets and Safes for Protection of Paper Records, Computer Media, and Photographic Records from Fire Damage”, CRM vol. 16 no. 5, supplement (US National Park Service, 1993), quoting UL 72 and listing UL and SMNA label classes, via NPS History. ↩︎
  30. Kyle Clouse, “Fire Testing Gun Safes”, Liberty Safe blog, 18 January 2019 (testing “based” on US Department of Commerce guidelines; furnace brought to 1200 degrees within ten minutes and held there). ↩︎
  31. UL Solutions, “Turning Up the Heat: A Sneak Peek into UL’s Fire Testing of Safes”, 1 December 2015. ↩︎
  32. George Hayter Chubb, Protection from Fire and Thieves (London, 1875), ch. IV, “Safes against fire” (put “little faith in the tests” unless “conducted by persons quite disinterested”; burnt contents always in “light ones”; a safe in a burning house will have “fallen into rubbish” or be covered by “the débris from above”), via Project Gutenberg. ↩︎
  33. RAND Corporation, Gun Policy in America, “The Effects of Child-Access Prevention Laws”, updated 29 January 2026 (as of 1 January 2025, 35 states and the District of Columbia have CAP laws; 26 states and DC have negligent storage laws; nine others impose liability only for intentional, knowing or reckless provision; penalties and age thresholds vary). Accessed 2 November 2026. ↩︎
  34. 18 U.S. Code section 922(z) (licensed importers, manufacturers and dealers may not transfer a handgun unless the buyer is provided with a secure gun storage or safety device) and section 921(a)(34) (definition includes “a safe, gun safe, gun case, lock box, or other device”), via Cornell Legal Information Institute. Accessed 2 November 2026. ↩︎
  35. George Hayter Chubb, Protection from Fire and Thieves (London, 1875), ch. VI, “Strong-rooms” (the basement “is undoubtedly the right position”; “the best place happens to be often rather inconvenient”; a room on an upper floor “has to depend for support on what is not a strong-room”; damp; the 1865 Hong Kong robbery through the floor), via Project Gutenberg. ↩︎
  36. George Hayter Chubb, Protection from Fire and Thieves (London, 1875), ch. V, “Second-hand safes” (“A tolerably correct guide in the purchase of a safe is its weight”; a safe 22 x 17 x 16 in “should weigh about” 3 cwt), via Project Gutenberg. ↩︎
  37. Nicholas Huetter, US Patent 232,036, “Burglar-proof safe”, filed 6 April 1880, granted 7 September 1880. (a “closet or safe which may be concealed in a wall”). ↩︎
  38. Advertisement, “Meilink’s Steel Wall Safe”, The Literary Digest, 4 June 1910, p. 1154 (“Prices $14.00 and up, built in”; “Hide it in a closet, or behind a picture or piece of furniture if you like”). ↩︎
  39. California Department of Justice, Office of the Attorney General, “Roster of Firearm Safety Devices Certified for Sale” (since 1 January 2002 no firearm may be sold or transferred in California without a DOJ-approved firearm safety device, Penal Code section 23620 et seq.; gun safe exemption; recall notices). Accessed 2 November 2026. ↩︎

The History of Safes letter

One old safe a month, in your inbox

Once a month I send one safe worth a closer look, the new maker histories and a find from the patent and advert collection. Nothing else, and you can leave with one click.

You'll get a confirmation email first. One email a month, unsubscribe any time. Privacy policy.

Hos Logo
Greg

I work in IT and I'm a designer at heart. I write this blog because safes turned out to be a surprisingly big slice of history and pop culture. Every article here is checked against period catalogues, patents and trade directories, and my favourite story is still the Great Lock Controversy of 1851.

Articles: 182

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.